The patch regulator: axp20x: add drivevbus support for axp803 has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 1f5d6462b5856ddd44d4500ac80b7862faff351b Mon Sep 17 00:00:00 2001 From: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> Date: Mon, 23 Apr 2018 12:02:37 +0530 Subject: [PATCH] regulator: axp20x: add drivevbus support for axp803 Like axp221, axp223, axp813 the axp803 is also supporting external regulator to drive the OTG VBus through N_VBUSEN PMIC pin. Add support for it. Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++- drivers/regulator/axp20x-regulator.c | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 9455503b0299..d1762f3b30af 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -43,7 +43,7 @@ Optional properties: regulator to drive the OTG VBus, rather then as an input pin which signals whether the board is driving OTG VBus or not. - (axp221 / axp223 / axp813 only) + (axp221 / axp223 / axp803/ axp813 only) - x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is wired for master mode. The default is slave mode. @@ -132,6 +132,7 @@ FLDO2 : LDO : fldoin-supply : shared supply LDO_IO0 : LDO : ips-supply : GPIO 0 LDO_IO1 : LDO : ips-supply : GPIO 1 RTC_LDO : LDO : ips-supply : always on +DRIVEVBUS : Enable output : drivevbus-supply : external regulator AXP806 regulators, type, and corresponding input supply names: diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 181622b2813d..91b8ff8bac15 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -721,6 +721,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev) case AXP803_ID: regulators = axp803_regulators; nregulators = AXP803_REG_ID_MAX; + drivevbus = of_property_read_bool(pdev->dev.parent->of_node, + "x-powers,drive-vbus-en"); break; case AXP806_ID: regulators = axp806_regulators; -- 2.17.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
