On Fri, 20 Apr 2018 19:05:12 +0200
Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx> wrote:
> On 20/04/2018 18:54, Martin Kelly wrote:
> > Document that the hardware supports falling edge, rising edge, level
> > low, and level high interrupt types, rather than just rising edge.
> >
> > The language used is the same as that in st_lsm6dsx.txt.
> >
> > Signed-off-by: Martin Kelly <mkelly@xxxxxxxx>
Hi Martin,
Please pick up an acks / reviewed-by's from earlier versions.
The chances are I'll miss them some of the time otherwise.
Rob acked this one.
Applied with the two acks I know of to the togreg branch of iio.git
and pushed out as testing for the autobuilders to play with it.
Thanks,
Jonathan
> > ---
> > Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt | 11 ++++++++---
> > 1 file changed, 8 insertions(+), 3 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> > index 2b4514592f83..6b106d5ef298 100644
> > --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> > +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> > @@ -11,7 +11,12 @@ Required properties:
> > "invensense,icm20608"
> > - reg : the I2C address of the sensor
> > - interrupt-parent : should be the phandle for the interrupt controller
> > - - interrupts : interrupt mapping for GPIO IRQ
> > + - interrupts: interrupt mapping for IRQ. It should be configured with flags
> > + IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
> > + IRQ_TYPE_EDGE_FALLING.
> > +
> > + Refer to interrupt-controller/interrupts.txt for generic interrupt client node
> > + bindings.
> >
> > Optional properties:
> > - mount-matrix: an optional 3x3 mounting rotation matrix
> > @@ -24,7 +29,7 @@ Example:
> > compatible = "invensense,mpu6050";
> > reg = <0x68>;
> > interrupt-parent = <&gpio1>;
> > - interrupts = <18 1>;
> > + interrupts = <18 IRQ_TYPE_EDGE_RISING>;
> > mount-matrix = "-0.984807753012208", /* x0 */
> > "0", /* y0 */
> > "-0.173648177666930", /* z0 */
> > @@ -41,7 +46,7 @@ Example:
> > compatible = "invensense,mpu9250";
> > reg = <0x68>;
> > interrupt-parent = <&gpio3>;
> > - interrupts = <21 1>;
> > + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
> > i2c-gate {
> > #address-cells = <1>;
> > #size-cells = <0>;
> >
>
>
> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
