On 04/20/2018 01:03 PM, Simon Horman wrote:
>> Define the Condor board dependent part of the MMC0 (connected to eMMC chip)
>> device node along with the necessary voltage regulators...
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>>
>> ---
>> arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 43 ++++++++++++++++++++++++
>> 1 file changed, 43 insertions(+)
>>
>> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
>> ===================================================================
>> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
>> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
>> @@ -27,6 +27,24 @@
>> /* first 128MB is reserved for secure area. */
>> reg = <0 0x48000000 0 0x78000000>;
>> };
>> +
>> + d3_3v: regulator-0 {
>
> Please use reg_3p3v: regulator1 for consistency with salvator-common.dtsi
Hm, not sure why I have to copy what I consider a bad example... the SoCs are
not pin compatible anyway.
>> + compatible = "regulator-fixed";
>> + regulator-name = "D3.3V";
>
> And "fixed-3.3V"
Ugh. That's pretty poor name I think. My names do correspond to the schematics
and these only muddle things up, I think...
[...]
>> @@ -70,6 +101,18 @@
>> function = "avb";
>> };
>>
>> + mmc_1_8v_pins: mmc_1_8v {
>> + groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
>> + function = "mmc";
>> + power-source = <1800>;
>> + };
>> +
>> + mmc_3_3v_pins: mmc_3_3v {
>> + groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
>> + function = "mmc";
>> + power-source = <3300>;
>> + };
>
> Again please make this more consistent with salvator-common.dtsi.
Ah, you mean the _uhs label name postfix? OK...
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
