Some displays on SUN4i devices wouldn't properly stay on unless 'clk_ignore_unused' is used. Change the duplicate clocks to the probably intended ones. Signed-off-by: Pascal Roeleven <dev@xxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/sun4i-a10.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 77e8436b..3a1c6b45 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -76,7 +76,7 @@ allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, - <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>, <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; @@ -88,7 +88,7 @@ allwinner,pipeline = "de_fe0-de_be0-lcd0"; clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>, - <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_TCON0_CH0>, + <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>, <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; @@ -99,7 +99,7 @@ allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, - <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
