On 19 April 2018 at 19:58, Kevin Hilman <khilman@xxxxxxxxxxxx> wrote: > Yixun Lan <yixun.lan@xxxxxxxxxxx> writes: > >> From: Nan Li <nan.li@xxxxxxxxxxx> >> >> The IP of eMMC controller in AXG is similiar to Meson-GX series. >> Here we add the initial support of the HS200 mode with >> clock running at 166MHz (to be safe), since we found some eMMC chip >> fail to run at 200MHz due to tunning phase error. >> >> Signed-off-by: Nan Li <nan.li@xxxxxxxxxxx> >> Signed-off-by: Yixun Lan <yixun.lan@xxxxxxxxxxx> > > Applied to v4.18/dt64 > >> --- >> Hi Kevin >> Please note this patch actually depend on the eMMC driver here [0]. >> Still a few problem to solve, to improve the tuning phase driver to make >> the clock running at 200MHz, and to further support the HS400 mode. >> Anyway, this patch itself is quite independent. > > The driver changes are queued for v4.18 also. Good! Right, may I consider that as an ack? :-) Kind regards Uffe > > Kevin > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
