The Microchip LAN78XX family of devices are Ethernet controllers with a USB interface. Despite being discoverable devices it can be useful to be able to configure them from Device Tree, particularly in low-cost applications without an EEPROM or programmed OTP. This patch set adds support for reading the MAC address and LED modes from Device Tree. v4: - Rename nodes in bindings doc. v3: - Move LED setting into PHY driver. v2: - Use eth_platform_get_mac_address. - Support up to 4 LEDs, and move LED mode constants into dt-bindings header. - Improve bindings document. - Remove EEE support. Phil Elwell (3): lan78xx: Read MAC address from DT if present lan78xx: Read LED states from Device Tree dt-bindings: Document the DT bindings for lan78xx .../devicetree/bindings/net/microchip,lan78xx.txt | 54 ++++++++++++++++ MAINTAINERS | 2 + drivers/net/phy/microchip.c | 25 ++++++++ drivers/net/usb/lan78xx.c | 74 +++++++++++++++------- include/dt-bindings/net/microchip-lan78xx.h | 21 ++++++ include/linux/microchipphy.h | 3 + 6 files changed, 156 insertions(+), 23 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/microchip,lan78xx.txt create mode 100644 include/dt-bindings/net/microchip-lan78xx.h -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
