Add support for DT property "microchip,led-modes", a vector of zero
to four cells (u32s) in the range 0-15, each of which sets the mode
for one of the LEDs. Some possible values are:
0=link/activity 1=link1000/activity
2=link100/activity 3=link10/activity
4=link100/1000/activity 5=link10/1000/activity
6=link10/100/activity 14=off 15=on
These values are given symbolic constants in a dt-bindings header.
Also use the presence of the DT property to indicate that the
LEDs should be enabled - necessary in the event that no valid OTP
or EEPROM is available.
Signed-off-by: Phil Elwell <phil@xxxxxxxxxxxxxxx>
---
MAINTAINERS | 1 +
drivers/net/phy/microchip.c | 25 ++++++++++++++++++++++
drivers/net/usb/lan78xx.c | 32 ++++++++++++++++++++++++++++-
include/dt-bindings/net/microchip-lan78xx.h | 21 +++++++++++++++++++
include/linux/microchipphy.h | 3 +++
5 files changed, 81 insertions(+), 1 deletion(-)
create mode 100644 include/dt-bindings/net/microchip-lan78xx.h
diff --git a/MAINTAINERS b/MAINTAINERS
index b60179d..23735d9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14573,6 +14573,7 @@ M: Microchip Linux Driver Support <UNGLinuxDriver@xxxxxxxxxxxxx>
L: netdev@xxxxxxxxxxxxxxx
S: Maintained
F: drivers/net/usb/lan78xx.*
+F: include/dt-bindings/net/microchip-lan78xx.h
USB MASS STORAGE DRIVER
M: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index 0f293ef..ef5e160 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -20,6 +20,8 @@
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/microchipphy.h>
+#include <linux/of.h>
+#include <dt-bindings/net/microchip-lan78xx.h>
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@xxxxxxxxxxxxx>"
#define DRIVER_DESC "Microchip LAN88XX PHY driver"
@@ -70,6 +72,8 @@ static int lan88xx_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
struct lan88xx_priv *priv;
+ u32 led_modes[4];
+ int len;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -77,6 +81,27 @@ static int lan88xx_probe(struct phy_device *phydev)
priv->wolopts = 0;
+ len = of_property_read_variable_u32_array(dev->of_node,
+ "microchip,led-modes",
+ led_modes,
+ 0,
+ ARRAY_SIZE(led_modes));
+ if (len >= 0) {
+ u32 reg = 0;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (led_modes[i] > 15)
+ return -EINVAL;
+ reg |= led_modes[i] << (i * 4);
+ }
+ for (; i < ARRAY_SIZE(led_modes); i++)
+ reg |= LAN78XX_FORCE_LED_OFF << (i * 4);
+ (void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg);
+ } else if (len == -EOVERFLOW) {
+ return -EINVAL;
+ }
+
/* these values can be used to identify internal PHY */
priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index a823f01..6b03b97 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -37,6 +37,7 @@
#include <linux/irqchip/chained_irq.h>
#include <linux/microchipphy.h>
#include <linux/phy.h>
+#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include "lan78xx.h"
@@ -1760,6 +1761,7 @@ static int lan78xx_mdiobus_write(struct mii_bus *bus, int phy_id, int idx,
static int lan78xx_mdio_init(struct lan78xx_net *dev)
{
+ struct device_node *node;
int ret;
dev->mdiobus = mdiobus_alloc();
@@ -1788,7 +1790,13 @@ static int lan78xx_mdio_init(struct lan78xx_net *dev)
break;
}
- ret = mdiobus_register(dev->mdiobus);
+ node = of_get_child_by_name(dev->udev->dev.of_node, "mdio");
+ if (node) {
+ ret = of_mdiobus_register(dev->mdiobus, node);
+ of_node_put(node);
+ } else {
+ ret = mdiobus_register(dev->mdiobus);
+ }
if (ret) {
netdev_err(dev->net, "can't register MDIO bus\n");
goto exit1;
@@ -2077,6 +2085,28 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control);
phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv);
+ if (phydev->mdio.dev.of_node) {
+ u32 reg;
+ int len;
+
+ len = of_property_count_elems_of_size(phydev->mdio.dev.of_node,
+ "microchip,led-modes",
+ sizeof(u32));
+ if (len >= 0) {
+ /* Ensure the appropriate LEDs are enabled */
+ lan78xx_read_reg(dev, HW_CFG, ®);
+ reg &= ~(HW_CFG_LED0_EN_ |
+ HW_CFG_LED1_EN_ |
+ HW_CFG_LED2_EN_ |
+ HW_CFG_LED3_EN_);
+ reg |= (len > 0) * HW_CFG_LED0_EN_ |
+ (len > 1) * HW_CFG_LED1_EN_ |
+ (len > 2) * HW_CFG_LED2_EN_ |
+ (len > 3) * HW_CFG_LED3_EN_;
+ lan78xx_write_reg(dev, HW_CFG, reg);
+ }
+ }
+
genphy_config_aneg(phydev);
dev->fc_autoneg = phydev->autoneg;
diff --git a/include/dt-bindings/net/microchip-lan78xx.h b/include/dt-bindings/net/microchip-lan78xx.h
new file mode 100644
index 0000000..0742ff0
--- /dev/null
+++ b/include/dt-bindings/net/microchip-lan78xx.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _DT_BINDINGS_MICROCHIP_LAN78XX_H
+#define _DT_BINDINGS_MICROCHIP_LAN78XX_H
+
+/* LED modes for LAN7800/LAN7850 embedded PHY */
+
+#define LAN78XX_LINK_ACTIVITY 0
+#define LAN78XX_LINK_1000_ACTIVITY 1
+#define LAN78XX_LINK_100_ACTIVITY 2
+#define LAN78XX_LINK_10_ACTIVITY 3
+#define LAN78XX_LINK_100_1000_ACTIVITY 4
+#define LAN78XX_LINK_10_1000_ACTIVITY 5
+#define LAN78XX_LINK_10_100_ACTIVITY 6
+#define LAN78XX_DUPLEX_COLLISION 8
+#define LAN78XX_COLLISION 9
+#define LAN78XX_ACTIVITY 10
+#define LAN78XX_AUTONEG_FAULT 12
+#define LAN78XX_FORCE_LED_OFF 14
+#define LAN78XX_FORCE_LED_ON 15
+
+#endif
diff --git a/include/linux/microchipphy.h b/include/linux/microchipphy.h
index eb492d4..8e4015e 100644
--- a/include/linux/microchipphy.h
+++ b/include/linux/microchipphy.h
@@ -70,4 +70,7 @@
#define LAN88XX_MMD3_CHIP_ID (32877)
#define LAN88XX_MMD3_CHIP_REV (32878)
+/* Registers specific to the LAN7800/LAN7850 embedded phy */
+#define LAN78XX_PHY_LED_MODE_SELECT (0x1D)
+
#endif /* _MICROCHIPPHY_H */
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
