On Wed, Apr 18, 2018 at 04:45:22PM +0100, Phil Elwell wrote: > Add support for DT property "microchip,led-modes", a vector of zero > to four cells (u32s) in the range 0-15, each of which sets the mode > for one of the LEDs. Some possible values are: > > 0=link/activity 1=link1000/activity > 2=link100/activity 3=link10/activity > 4=link100/1000/activity 5=link10/1000/activity > 6=link10/100/activity 14=off 15=on > > These values are given symbolic constants in a dt-bindings header. > > Also use the presence of the DT property to indicate that the > LEDs should be enabled - necessary in the event that no valid OTP > or EEPROM is available. Hi Phil As i said last week, these are PHY properties, so should be in the PHY node in device tree. It should be the PHY driver which parses these properties and configures the LEDs, not the MAC. Andrew -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
