From: Benoit Parrot <bparrot@xxxxxx> Add two different camera overlays for am57xx-evm, mt9t111 and ov10635. Signed-off-by: Benoit Parrot <bparrot@xxxxxx> Signed-off-by: Tero Kristo <t-kristo@xxxxxx> --- arch/arm/boot/dts/ti/mt9t111.dtso | 44 ++++++++++++++++++++++++ arch/arm/boot/dts/ti/ov10635.dtso | 71 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 115 insertions(+) create mode 100644 arch/arm/boot/dts/ti/mt9t111.dtso create mode 100644 arch/arm/boot/dts/ti/ov10635.dtso diff --git a/arch/arm/boot/dts/ti/mt9t111.dtso b/arch/arm/boot/dts/ti/mt9t111.dtso new file mode 100644 index 0000000..80e77ae --- /dev/null +++ b/arch/arm/boot/dts/ti/mt9t111.dtso @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; +/plugin/; +#include <dt-bindings/gpio/gpio.h> + +&i2c5 { + mt9t11x@3C { + compatible = "aptina,mt9t111"; + bufen-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + camen-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + oscen-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + reg = <0x3C>; + reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + + port { + cam: endpoint { + hsync-active = <1>; + input-clock-freq = <32000000>; + pclk-sample = <0>; + pixel-clock-freq = <96000000>; + remote-endpoint = <&vin3a>; + vsync-active = <0>; + }; + }; + }; +}; + +&vin3a { + status = "okay"; + + endpoint { + remote-endpoint = <&cam>; + slave-mode; + }; +}; + +&vip2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ti/ov10635.dtso b/arch/arm/boot/dts/ti/ov10635.dtso new file mode 100644 index 0000000..856f5de --- /dev/null +++ b/arch/arm/boot/dts/ti/ov10635.dtso @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; +/plugin/; +#include <dt-bindings/gpio/gpio.h> + +/ { + fragment@101 { + target-path = "/"; + + __overlay__ { + clk_ov10635: clk_ov10635 { + compatible = "gpio-gate-clock"; + #clock-cells = <0>; + clocks = <&clk_ov10635_fixed>; + enable-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; + }; + + clk_ov10635_fixed: clk_ov10635_fixed { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + }; + }; +}; + +&i2c5 { + ov10635@30 { + compatible = "ovti,ov10635"; + clock-names = "xvclk"; + clocks = <&clk_ov10635>; + powerdown-gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; + reg = <0x30>; + reset-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + + port { + cam: endpoint { + hsync-active = <1>; + pclk-sample = <1>; + remote-endpoint = <&vin3a>; + vsync-active = <1>; + }; + }; + }; +}; + +&vin3a { + status = "okay"; + + endpoint { + remote-endpoint = <&cam>; + slave-mode; + }; +}; + +&vip2 { + status = "okay"; +}; + +&gpio6 { + p11 { + gpio-hog; + gpios = <11 GPIO_ACTIVE_LOW>; + line-name = "cm-camen-gpio"; + output-high; + }; +}; -- 1.9.1 -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
