On Wed, Apr 11, 2018 at 06:10:15PM +0300, Stefan Popa wrote:
> Document adi,adp5061 properties.
>
> Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx>
> ---
> Changes in v3:
> - Split devicetree bindings into a separate patch.
>
> .../devicetree/bindings/power/supply/adp5061.txt | 17 +++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 18 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/supply/adp5061.txt
>
> diff --git a/Documentation/devicetree/bindings/power/supply/adp5061.txt b/Documentation/devicetree/bindings/power/supply/adp5061.txt
> new file mode 100644
> index 0000000..7447446
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/adp5061.txt
> @@ -0,0 +1,17 @@
> +Analog Devices ADP5061 Programmable Linear Battery Charger Driver
> +
> +Required properties:
> + - compatible: should be "adi,adp5061"
> + - reg: i2c address of the device
> +
> +The node for this driver must be a child node of a I2C controller, hence
> +all mandatory properties described in
> +Documentation/devicetree/bindings/i2c/i2c.txt
> +must be specified.
> +
> +Example:
> +
> + adp5061@14 {
> + compatible = "adi,adp5061";
> + reg = <0x14>;
Same question as the last version. This seems awfully simple for a
charger. Don't you need to know and describe battery parameters.
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
