Re: [PATCH v2 2/9] PCI: dwc: Add support for endpoint mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kishon,

On 10/04/2018 06:12, Kishon Vijay Abraham I wrote:
> Hi,
> 
> On Monday 09 April 2018 03:11 PM, Gustavo Pimentel wrote:
>> The PCIe controller dual mode is capable of operating in host mode as well
>> as endpoint mode by configuration, therefore this patch aims to add
>> endpoint mode support to the designware driver.
>>
>> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
>> ---
>> Change v1->v2:
>>  - Removed dw_plat_pcie_stop_link empty function.
>>  - Implemented Kishon's suggestions about dw-pcie-rc and dw-pcie strings.
>> compatibility.
>>  - Added second entry on pci_epf_test_ids structure.
>>
>>  drivers/pci/dwc/Kconfig                       |  45 ++++++--
>>  drivers/pci/dwc/pcie-designware-ep.c          |   4 +-
>>  drivers/pci/dwc/pcie-designware-plat.c        | 153 ++++++++++++++++++++++++--
>>  drivers/pci/endpoint/functions/pci-epf-test.c |   9 ++
>>  4 files changed, 190 insertions(+), 21 deletions(-)
>>
>> diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
>> index 2f3f5c5..3fd7daf 100644
>> --- a/drivers/pci/dwc/Kconfig
>> +++ b/drivers/pci/dwc/Kconfig
>> @@ -7,8 +7,7 @@ config PCIE_DW
>>  
>>  config PCIE_DW_HOST
>>          bool
>> -	depends on PCI
>> -	depends on PCI_MSI_IRQ_DOMAIN
>> +	depends on PCI && PCI_MSI_IRQ_DOMAIN
>>          select PCIE_DW
>>  
>>  config PCIE_DW_EP
>> @@ -52,16 +51,42 @@ config PCI_DRA7XX_EP
>>  
>>  config PCIE_DW_PLAT
>>  	bool "Platform bus based DesignWare PCIe Controller"
>> -	depends on PCI
>> -	depends on PCI_MSI_IRQ_DOMAIN
>> -	select PCIE_DW_HOST
>> -	---help---
>> -	 This selects the DesignWare PCIe controller support. Select this if
>> -	 you have a PCIe controller on Platform bus.
>> +	help
>> +	  There are two instances of PCIe controller in Designware IP.
>> +	  This controller can work either as EP or RC. In order to enable
>> +	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
>> +	  order to enable device-specific features PCIE_DW_PLAT_EP must be
>> +	  selected.
>>  
>> -	 If you have a controller with this interface, say Y or M here.
>> +config PCIE_DW_PLAT_HOST
>> +	bool "Platform bus based DesignWare PCIe Controller - Host mode"
>> +	depends on PCI && PCI_MSI_IRQ_DOMAIN
>> +	select PCIE_DW_HOST
>> +	select PCIE_DW_PLAT
>> +	default y
>> +	help
>> +	  Enables support for the PCIe controller in the Designware IP to
>> +	  work in host mode. There are two instances of PCIe controller in
>> +	  Designware IP.
>> +	  This controller can work either as EP or RC. In order to enable
>> +	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
>> +	  order to enable device-specific features PCI_DW_PLAT_EP must be
>> +	  selected.
>>  
>> -	 If unsure, say N.
>> +config PCIE_DW_PLAT_EP
>> +	bool "Platform bus based DesignWare PCIe Controller - Endpoint mode"
>> +	depends on PCI && PCI_MSI_IRQ_DOMAIN
>> +	depends on PCI_ENDPOINT
>> +	select PCIE_DW_EP
>> +	select PCIE_DW_PLAT
>> +	help
>> +	  Enables support for the PCIe controller in the Designware IP to
>> +	  work in endpoint mode. There are two instances of PCIe controller
>> +	  in Designware IP.
>> +	  This controller can work either as EP or RC. In order to enable
>> +	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
>> +	  order to enable device-specific features PCI_DW_PLAT_EP must be
>> +	  selected.
>>  
>>  config PCI_EXYNOS
>>  	bool "Samsung Exynos PCIe controller"
>> diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c
>> index f07678b..4ac135a 100644
>> --- a/drivers/pci/dwc/pcie-designware-ep.c
>> +++ b/drivers/pci/dwc/pcie-designware-ep.c
>> @@ -15,8 +15,10 @@
>>  void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
>>  {
>>  	struct pci_epc *epc = ep->epc;
>> +	struct pci_epf *epf;
>>  
>> -	pci_epc_linkup(epc);
>> +	list_for_each_entry(epf, &epc->pci_epf, list)
>> +		pci_epf_linkup(epf);
>>  }
> 
> This shouldn't be required anymore.

Ok. I'll revert it.

>>  
>>  static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar,
>> diff --git a/drivers/pci/dwc/pcie-designware-plat.c b/drivers/pci/dwc/pcie-designware-plat.c
>> index 5416aa8..5382a7a 100644
>> --- a/drivers/pci/dwc/pcie-designware-plat.c
>> +++ b/drivers/pci/dwc/pcie-designware-plat.c
>> @@ -12,19 +12,29 @@
>>  #include <linux/interrupt.h>
>>  #include <linux/kernel.h>
>>  #include <linux/init.h>
>> +#include <linux/of_device.h>
>>  #include <linux/of_gpio.h>
>>  #include <linux/pci.h>
>>  #include <linux/platform_device.h>
>>  #include <linux/resource.h>
>>  #include <linux/signal.h>
>>  #include <linux/types.h>
>> +#include <linux/regmap.h>
>>  
>>  #include "pcie-designware.h"
>>  
>>  struct dw_plat_pcie {
>> -	struct dw_pcie		*pci;
>> +	struct dw_pcie			*pci;
>> +	struct regmap			*regmap;
>> +	enum dw_pcie_device_mode	mode;
>>  };
>>  
>> +struct dw_plat_pcie_of_data {
>> +	enum dw_pcie_device_mode	mode;
>> +};
>> +
>> +static const struct of_device_id dw_plat_pcie_of_match[];
>> +
>>  static int dw_plat_pcie_host_init(struct pcie_port *pp)
>>  {
>>  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> @@ -42,9 +52,53 @@ static const struct dw_pcie_host_ops dw_plat_pcie_host_ops = {
>>  	.host_init = dw_plat_pcie_host_init,
>>  };
>>  
>> -static int dw_plat_add_pcie_port(struct pcie_port *pp,
>> +static int dw_plat_pcie_establish_link(struct dw_pcie *pci)
>> +{
>> +	return 0;
>> +}
>> +
>> +static const struct dw_pcie_ops dw_pcie_ops = {
>> +	.start_link = dw_plat_pcie_establish_link,
>> +};
>> +
>> +static void dw_plat_pcie_ep_init(struct dw_pcie_ep *ep)
>> +{
>> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>> +	enum pci_barno bar;
>> +
>> +	for (bar = BAR_0; bar <= BAR_5; bar++)
>> +		dw_pcie_ep_reset_bar(pci, bar);
>> +}
>> +
>> +static int dw_plat_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
>> +				     enum pci_epc_irq_type type,
>> +				     u8 interrupt_num)
>> +{
>> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>> +
>> +	switch (type) {
>> +	case PCI_EPC_IRQ_LEGACY:
>> +		dev_err(pci->dev, "EP cannot trigger legacy IRQs\n");
>> +		return -EINVAL;
>> +	case PCI_EPC_IRQ_MSI:
>> +		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
>> +	default:
>> +		dev_err(pci->dev, "UNKNOWN IRQ type\n");
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static struct dw_pcie_ep_ops pcie_ep_ops = {
>> +	.ep_init = dw_plat_pcie_ep_init,
>> +	.raise_irq = dw_plat_pcie_ep_raise_irq,
>> +};
>> +
>> +static int dw_plat_add_pcie_port(struct dw_plat_pcie *dw_plat_pcie,
>>  				 struct platform_device *pdev)
>>  {
>> +	struct dw_pcie *pci = dw_plat_pcie->pci;
>> +	struct pcie_port *pp = &pci->pp;
>>  	struct device *dev = &pdev->dev;
>>  	int ret;
>>  
>> @@ -63,15 +117,44 @@ static int dw_plat_add_pcie_port(struct pcie_port *pp,
>>  
>>  	ret = dw_pcie_host_init(pp);
>>  	if (ret) {
>> -		dev_err(dev, "failed to initialize host\n");
>> +		dev_err(dev, "Failed to initialize host\n");
>>  		return ret;
>>  	}
>>  
>>  	return 0;
>>  }
>>  
>> -static const struct dw_pcie_ops dw_pcie_ops = {
>> -};
>> +static int dw_plat_add_pcie_ep(struct dw_plat_pcie *dw_plat_pcie,
>> +			       struct platform_device *pdev)
>> +{
>> +	int ret;
>> +	struct dw_pcie_ep *ep;
>> +	struct resource *res;
>> +	struct device *dev = &pdev->dev;
>> +	struct dw_pcie *pci = dw_plat_pcie->pci;
>> +
>> +	ep = &pci->ep;
>> +	ep->ops = &pcie_ep_ops;
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi2");
>> +	pci->dbi_base2 = devm_ioremap(dev, res->start, resource_size(res));
> 
> This can throw up a NULL pointer dereferencing error. Use devm_ioremap_resource
> instead.

I have looked on [1] and [2] and both implementations uses devm_ioremap
function, they are also wrong?

[1] -> https://elixir.bootlin.com/linux/latest/source/drivers/pci/dwc/pcie-artpec6.c
[2] -> https://elixir.bootlin.com/linux/latest/source/drivers/pci/dwc/pci-dra7xx.c

> 
>> +	if (IS_ERR(pci->dbi_base2))
>> +		return PTR_ERR(pci->dbi_base2);

However this validation is wrong. By using the devm_ioremap function the correct
validation should be like this:

if (!pci->dbi_base2)
	return -ENOMEM;

like exists on [1] and [2]. Can I maintain the coherency with [1] and [2]?

>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
>> +	if (!res)
>> +		return -EINVAL;
>> +
>> +	ep->phys_base = res->start;
>> +	ep->addr_size = resource_size(res);
>> +
>> +	ret = dw_pcie_ep_init(ep);
>> +	if (ret) {
>> +		dev_err(dev, "Failed to initialize endpoint\n");
>> +		return ret;
>> +	}
>> +	return 0;
>> +}
>>  
>>  static int dw_plat_pcie_probe(struct platform_device *pdev)
>>  {
>> @@ -80,6 +163,16 @@ static int dw_plat_pcie_probe(struct platform_device *pdev)
>>  	struct dw_pcie *pci;
>>  	struct resource *res;  /* Resource from DT */
>>  	int ret;
>> +	const struct of_device_id *match;
>> +	const struct dw_plat_pcie_of_data *data;
>> +	enum dw_pcie_device_mode mode;
>> +
>> +	match = of_match_device(dw_plat_pcie_of_match, dev);
>> +	if (!match)
>> +		return -EINVAL;
>> +
>> +	data = (struct dw_plat_pcie_of_data *)match->data;
>> +	mode = (enum dw_pcie_device_mode)data->mode;
>>  
>>  	dw_plat_pcie = devm_kzalloc(dev, sizeof(*dw_plat_pcie), GFP_KERNEL);
>>  	if (!dw_plat_pcie)
>> @@ -93,23 +186,63 @@ static int dw_plat_pcie_probe(struct platform_device *pdev)
>>  	pci->ops = &dw_pcie_ops;
>>  
>>  	dw_plat_pcie->pci = pci;
>> +	dw_plat_pcie->mode = mode;
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
>> +	if (!res)
>> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>  
>> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>  	pci->dbi_base = devm_ioremap_resource(dev, res);
>>  	if (IS_ERR(pci->dbi_base))
>>  		return PTR_ERR(pci->dbi_base);
>>  
>>  	platform_set_drvdata(pdev, dw_plat_pcie);
>>  
>> -	ret = dw_plat_add_pcie_port(&pci->pp, pdev);
>> -	if (ret < 0)
>> -		return ret;
>> +	switch (dw_plat_pcie->mode) {
>> +	case DW_PCIE_RC_TYPE:
>> +		if (!IS_ENABLED(CONFIG_PCIE_DW_PLAT_HOST))
>> +			return -ENODEV;
>> +
>> +		ret = dw_plat_add_pcie_port(dw_plat_pcie, pdev);
>> +		if (ret < 0)
>> +			return ret;
>> +		break;
>> +	case DW_PCIE_EP_TYPE:
>> +		if (!IS_ENABLED(CONFIG_PCIE_DW_PLAT_EP))
>> +			return -ENODEV;
>> +
>> +		ret = dw_plat_add_pcie_ep(dw_plat_pcie, pdev);
>> +		if (ret < 0)
>> +			return ret;
>> +		break;
>> +	default:
>> +		dev_err(dev, "INVALID device type %d\n", dw_plat_pcie->mode);
>> +	}
>>  
>>  	return 0;
>>  }
>>  
>> +static const struct dw_plat_pcie_of_data dw_plat_pcie_rc_of_data = {
>> +	.mode = DW_PCIE_RC_TYPE,
>> +};
>> +
>> +static const struct dw_plat_pcie_of_data dw_plat_pcie_ep_of_data = {
>> +	.mode = DW_PCIE_EP_TYPE,
>> +};
>> +
>>  static const struct of_device_id dw_plat_pcie_of_match[] = {
>> -	{ .compatible = "snps,dw-pcie", },
>> +	{
>> +		.compatible = "snps,dw-pcie",
>> +		.data = &dw_plat_pcie_rc_of_data,
>> +	},
>> +	{
>> +		.compatible = "snps,dw-pcie-rc",
>> +		.data = &dw_plat_pcie_rc_of_data,
>> +	},
>> +	{
>> +		.compatible = "snps,dw-pcie-ep",
>> +		.data = &dw_plat_pcie_ep_of_data,
>> +	},
>>  	{},
>>  };
>>  
>> diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
>> index 7cef851..45d1c63 100644
>> --- a/drivers/pci/endpoint/functions/pci-epf-test.c
>> +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> 
> have a separate patch for this.

Ok.

>> @@ -459,10 +459,19 @@ static int pci_epf_test_bind(struct pci_epf *epf)
>>  	return 0;
>>  }
>>  
>> +static const struct pci_epf_test_data data_cfg2 = {
>> +	.test_reg_bar = BAR_0,
> 
> default test_reg_bar is BAR_0. So you can skip this.

Ok, I'll remove it.

>> +	.linkup_notifier = false
>> +};
>> +
> 
> Thanks
> Kishon
> 

Regards,
Gustavo

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux