This series adds the plain basic support for booting a bare kernel on the RZ/N1D-DB Board. It's been trimmed to the strict minimum as a 'base', further patches that will add the rest of the support, pinctrl, clock architecture and quite a few others. Thanks for the comments on the previous versions! v4: + Fixes for suggestions by Simon Horman + Fixes for suggestions by Jacopo Mondi + Fixes for suggestions by Geert Uytterhoeven + Renamed the r9a06g0xx.dtsi file, given up on trying to get a family common file in, so dropped potential RZ/N1S support and now only focus on RZ/N1D for this patchset. + Added 'always-on' to the architected timer node, because it is. + Added ARCH_R9A06G032, to match others patterns like RCAR + Sorted the .dts files, added empty lines as required. + Fixed patch prefixes to match git-log for bindings&dts + Merged board .dts & Makefile changes together + Rebased on next-20180410 v3: + Fixes for suggestions by Geert Uytterhoeven + Removed SoC Specific renesas,r9a06g032-xxx, as it's not needed for now. + Kept renesas,rzn1 as a family/generic for this family. + Fixed a couple of the commit messages. + Added Geert's Reviewed-By where appropriate. v2: + Fixes for suggestions by Simon Horman + Fixes for suggestions by Rob Herring + Fixes for suggestions by Geert Uytterhoeven + Removed the mach file + Added a MFD base for the sysctrl block + Added a regmap based sub driver for the reboot handler + Renamed the files to match shmobile conventions + Adapted the compatible= strings to reflect 'family' vs 'part' distinction. + Removed the sysctrl.h file entirelly. + Fixed every warnings from the DTC compiler on W=12 mode. + Split the device-tree patches from the code. Michel Pollet (8): arm: shmobile: Add the RZ/N1 arch to the shmobile Kconfig arm: shmobile: Add the RZ/N1D (R9A06G032) to the shmobile Kconfig dt-bindings: mfd: renesas,rzn1-sysctrl: document RZ/N1 sysctrl node dt-bindings: reset: renesas,rzn1-reboot: document RZ/N1 reboot driver dt-bindings: arm: Document the RZN1D-DB board ARM: dts: Renesas RZ/N1 SoC base device tree file ARM: dts: Renesas RZN1D-DB Board base file reset: Renesas RZ/N1 reboot driver Documentation/devicetree/bindings/arm/shmobile.txt | 5 +- .../bindings/mfd/renesas,rzn1-sysctrl.txt | 23 +++++ .../bindings/power/renesas,rzn1-reboot.txt | 23 +++++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 29 ++++++ arch/arm/boot/dts/r9a06g032.dtsi | 94 ++++++++++++++++++ arch/arm/mach-shmobile/Kconfig | 9 ++ drivers/power/reset/Kconfig | 7 ++ drivers/power/reset/Makefile | 1 + drivers/power/reset/rzn1-reboot.c | 105 +++++++++++++++++++++ 10 files changed, 296 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/mfd/renesas,rzn1-sysctrl.txt create mode 100644 Documentation/devicetree/bindings/power/renesas,rzn1-reboot.txt create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts create mode 100644 arch/arm/boot/dts/r9a06g032.dtsi create mode 100644 drivers/power/reset/rzn1-reboot.c -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
