On 03/04/2018 18:53, Bjorn Helgaas wrote:
On Tue, Apr 03, 2018 at 06:02:43PM +0100, John Garry wrote:
On 03/04/2018 17:37, Thierry Reding wrote:
On Tue, Apr 03, 2018 at 05:01:37PM +0100, John Garry wrote:
+int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
+{
+ struct logic_pio_hwaddr *range;
+ resource_size_t start = new_range->hw_start;
+ resource_size_t end = new_range->hw_start + new_range->size;
+ resource_size_t mmio_sz = 0;
+ resource_size_t iio_sz = MMIO_UPPER_LIMIT;
+ int ret = 0;
+
+ if (!new_range || !new_range->fwnode || !new_range->size)
+ return -EINVAL;
+
+ mutex_lock(&io_range_mutex);
+ list_for_each_entry_rcu(range, &io_range_list, list) {
+ if (range->fwnode == new_range->fwnode) {
+ /* range already there */
+ ret = -EFAULT;
+ goto end_register;
+ }
Hi Thierry,
This is the -EFAULT that propagates to pci-tegra.c's ->probe() and fails
to bind the driver.
I'm not exactly sure what's causing the duplicate here because it's
rather difficult to get at something useful from just the ->fwnode, but
I'm fairly sure that the reason this breaks is because the Tegra driver
will defer probe due to some regulators that aren't available on the
first try. Given the above code and the rest of this file, I can't see a
way to "fix" the driver and remove the I/O range on failure.
This is doubly bad because this doesn't only leak the ranges on probe
deferral, but also on driver unload, and we just added support for
building the Tegra driver as a loadable module, so these are actually
cases that can happen in regular uses of the driver.
I have no idea on how to fix this. Anyone know of a quick fix to restore
PCI for Tegra other than reverting all of these changes?
I suppose an API could be added to unregister the range, but the calling
sequence is rather obfuscated, so removing the range will look totally
asymmetric, I'm afraid.
Here's the call stack:
tegra_pcie_probe()
tegra_pcie_parse_dt()
of_pci_range_to_resource()
pci_register_io_range()
logic_pio_register_range()
So the range here is registered as part of a resource parsing function,
which is supposed to not have any side-effects. There's no equivalent of
that parsing routine (i.e. no "unparse" function that would undo the
effects of parsing).
Perhaps a cleaner way would be to decouple the parsing from the actual
request step that has the side-effect.
This could be added if we agreed that it would be useful.
I guess in most cases these ranges will be static at least during one
boot. But it still feels like this should be removed when the driver
goes away. While this may not depend on data by the driver, and hence
won't cause a crash or anything, it just seems wrong to leave it
around when the driver no longer isn't.
That sounds reasonable, considering we do unmap the iospace when we release
- so it looks like currently we're leaving some IO range reserved which does
not have a mapping.
However this change seems non-trivial, considering we're now even coupling
the PIO range registration into DT parsing.
Going back in history a little, it looks like even before this commit
the I/O range registration was triggered by the parsing code and even
the range leak was there, except that it caused pci_register_io_range()
to return 0 rather than -EFAULT. Perhaps the quickest fix for this would
be to do the same in the new code and restore drivers that accidentally
depend on this behaviour.
I can confirm that the following fixes the issue for me, though I don't
think it's a very clean fix given that the range will remain requested
forever, even if the driver is gone. But since that's already been the
case for quite a while, probably something that can be fixed separately.
Right, there was no way to deregister the range previously. From looking at
the history here I see no reason to not support it.
As for this patch, as you said, the only difference is that we fault on
trying to register the same range again. So this solution seems reasonable.
Okay, I can turn this into a proper patch to fix this up. I suspect that
other drivers may be subject to the same regression. For the longer term
I think it'd be better to properly undo the registration on failure and
removal, but I suspect that it'd be quite a bit of work and not suitable
for v4.17 anymore.
Thanks, I had started to put the patch together but if you're happy to
continue then that's fine. Please let me know.
Since you seem to agree this is the right short-term fix and I would
squash it into the original commit anyway, I went ahead and did that
so we could get this into linux-next as soon as possible.
Ok, thanks.
John
Here's the diff from my previous "next" branch with respect to this
series:
diff --git a/lib/logic_pio.c b/lib/logic_pio.c
index 29cedeadb397..4664b87e1c5f 100644
--- a/lib/logic_pio.c
+++ b/lib/logic_pio.c
@@ -46,7 +46,6 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
list_for_each_entry_rcu(range, &io_range_list, list) {
if (range->fwnode == new_range->fwnode) {
/* range already there */
- ret = -EFAULT;
goto end_register;
}
if (range->flags == LOGIC_PIO_CPU_MMIO &&
.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
