On Tuesday 03 April 2018 04:03 PM, Gustavo Pimentel wrote: > Hi Kishon, > > On 02/04/2018 06:23, Kishon Vijay Abraham I wrote: >> Hi, >> >> On Wednesday 28 March 2018 05:08 PM, Gustavo Pimentel wrote: >>> Changes the IP registers size to accommodate the ATU unroll space. >>> >>> Replaces "ctrlreg" reg-name by "dbi" to be coherent with similar drivers. >>> >>> Replaces the pcie base address example by a real pcie base address in use. >>> >>> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx> >>> --- >>> Documentation/devicetree/bindings/pci/designware-pcie.txt | 12 ++++++------ >>> 1 file changed, 6 insertions(+), 6 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt >>> index 1da7ade..6300762 100644 >>> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt >>> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt >>> @@ -1,7 +1,8 @@ >>> * Synopsys DesignWare PCIe interface >>> >>> Required properties: >>> -- compatible: should contain "snps,dw-pcie" to identify the core. >>> +- compatible: >>> + "snps,dw-pcie" for RC mode; >> >> I think irrespective of RC mode or EP mode, "snps,dw-pcie" can be used to >> identify the pcie core? > > I guess so. What you suggest? I was just folling the same guideline present > here: https://lkml.org/lkml/2017/11/3/310 Okay, I think you should have "snps,dw-pcie-rc", "snps,dw-pcie" for RC mode; and in the later patch "snps,dw-pcie-ep", "snps,dw-pcie" for EP mode; > >>> - reg: Should contain the configuration address space. >>> - reg-names: Must be "config" for the PCIe configuration space. >>> (The old way of getting the configuration address space from "ranges" >>> @@ -41,11 +42,11 @@ EP mode: >>> >>> Example configuration: >>> >>> - pcie: pcie@dffff000 { >>> + pcie: pcie@dfc00000 { >>> compatible = "snps,dw-pcie"; >>> - reg = <0xdffff000 0x1000>, /* Controller registers */ >>> - <0xd0000000 0x2000>; /* PCI config space */ >>> - reg-names = "ctrlreg", "config"; >>> + reg = <0xdfc00000 0x302000>, /* IP registers */ >> >> which version of synopsys IP is this. I think the ideal thing to do here is to >> have a separate register space for iATU. > > I also agree with that. The unroll iATU was introduced on Synopsys IP version > 4.80 and the kernel patch was release on 2016-08-10 > https://patchwork.ozlabs.org/patch/657796/ > However a separate register space for iATU implies some extra code do handle it > (and of course some tests) that don't fit into this patch series, in my point of > view. Can this task enter in the backlog in order to be done in another patch > series? Yes sure. I think we should also make sure existing binding doesn't break. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
