+Sricharan, On 30-03-18, 00:26, Ilia Lin wrote: > In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996 > that have KRYO processors, the CPU ferequencies subset and voltage value > of each OPP varies based on the silicon variant in use. > Qualcomm Technologies, Inc. Process Voltage Scaling Tables > defines the voltage and frequency value based on the msm-id in SMEM > and speedbin blown in the efuse combination. > The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC > to provide the OPP framework with required information. > This is used to determine the voltage and frequency value for each OPP of > operating-points-v2 table when it is parsed by the OPP framework. > > This change adds documentation. > > Change-Id: I1953f652a48249fb516d175f0e965a9510cd4209 > Signed-off-by: Ilia Lin <ilialin@xxxxxxxxxxxxxx> > --- > .../devicetree/bindings/cpufreq/kryo-cpufreq.txt | 693 +++++++++++++++++++++ > 1 file changed, 693 insertions(+) > create mode 100644 Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt > > diff --git a/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt This should really go in opp directory. > new file mode 100644 > index 0000000..20cef9d > --- /dev/null > +++ b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt > @@ -0,0 +1,693 @@ > +Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings > +=================================== > + > +In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996 > +that have KRYO processors, the CPU ferequencies subset and voltage value > +of each OPP varies based on the silicon variant in use. > +Qualcomm Technologies, Inc. Process Voltage Scaling Tables > +defines the voltage and frequency value based on the msm-id in SMEM > +and speedbin blown in the efuse combination. > +The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC > +to provide the OPP framework with required information (existing HW bitmap). > +This is used to determine the voltage and frequency value for each OPP of > +operating-points-v2 table when it is parsed by the OPP framework. > + > +Required properties: > +-------------------- > +In 'cpus' nodes: > +- operating-points-v2: Phandle to the operating-points-v2 table to use. > + > +In 'operating-points-v2' table: > +- compatible: Should be > + - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996. > +- nvmem-cells: A phandle pointing to a nvmem-cells node representing the > + efuse registers that has information about the > + speedbin that is used to select the right frequency/voltage > + value pair. > + Please refer the for nvmem-cells > + bindings Documentation/devicetree/bindings/nvmem/nvmem.txt > + and also examples below. Sricharan is also working on adding these, just make sure you guys do the same thing.. -- viresh -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
