After showcasing my dtc change as RFC before, this series shows essentially where I want to go with the whole change - adding support for our ereaders without duplicating the generic pinconfig nodes :-) . And also provides with the dt change a user for the dtc flag addition. That being said, the dtc change might need a bit more review and I also don't know if it should go through the scripts/dtc variant like this or some upstream and how the *_shipped files should be handled. The patchset is done against linux-next from today, which includes both the pingroups moved to the individual board files and the bindings for the zforce touchscreen. Heiko Stuebner (3): dtc: add ability to make nodes conditional on them being referenced ARM: dts: imx6sl: move pingroups back into soc dtsi ARM: dts: imx6sl: add board file for BQ Cervantes arch/arm/boot/dts/imx6sl-bq-cervantes.dts | 133 +++++++++++++++++++++ arch/arm/boot/dts/imx6sl-evk.dts | 181 ----------------------------- arch/arm/boot/dts/imx6sl.dtsi | 185 ++++++++++++++++++++++++++++++ scripts/dtc/checks.c | 2 + scripts/dtc/dtc-lexer.l | 7 ++ scripts/dtc/dtc-parser.y | 5 + scripts/dtc/dtc.h | 4 + scripts/dtc/flattree.c | 3 + scripts/dtc/livetree.c | 14 +++ 9 files changed, 353 insertions(+), 181 deletions(-) create mode 100644 arch/arm/boot/dts/imx6sl-bq-cervantes.dts -- 1.8.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
