Hi! > @@ -510,17 +510,17 @@ > 07f4: 0000 > 07f8: 0000 > 07fc: 0000 > -0800: 0065 > -0804: 0000 > -0808: 0040 > +0800: 0025 # CPCAP_REG_VAUDIOC VAUDIO Control > +0804: 60cf # CPCAP_REG_CC Codec Control, moto cpcap.c:1337 sets 0x0093? > +0808: ae0a # CPCAP_REG_CDI Codec Digital Interface > 080c: 0000 > 0810: 0004 > -0814: 0804 > -0818: 079c > -081c: 0000 > -0820: 0924 > -0824: 0000 > -0828: 0000 > +0814: 0cc0 # CPCAP_REG_TXI TX Inputs, moto cpcap.c:1340 sets 0x0CC6? > +0818: 0610 # CPCAP_REG_TXMP TX MIC PGA's, moto cpcap.c:1343 sets 0x0273? > +081c: 0006 # CPCAP_REG_RXOA RX Output Amplifiers > +0820: 0b2c # CPCAP_REG_RXVC RX Volume Control > +0824: 0606 # CPCAP_REG_RXCOA RX Codec to Output Amps > +0828: 0600 # CPCAP_REG_RXSDOA RX Stereo DAC to Output Amps > 082c: 0400 > 0830: 0000 > 0834: 0030 > > I wonder if mdm6600 is the i2s master during the voice call? > > Then using the n_gsm ts 27.010 uart mux, I dial: > > ./ngsm-rw 1 "AT+CFUN=1" # connect to network > U0001+CFUN:OK > ./ngsm-rw 2 "AT+CMUT=0" # unmute speaker over ch2, do this over qmi? > U0001+CMUT:OK > ./ngsm-rw 1 "ATD#123" # dial number > U0001D:OK > > And I do hear a voice talking over the speakerphone :) Sorry have not tested the > mic yet.. Hehe, ok, that's fun! I don't need +CMUT=0. It gave me error but then the call worked, anyway... (I'm working with ttyUSB4). I don't know how to hang the call up. ATH did not work for me. And no, microphone does not work. Thanks! Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
