Hi, On Wed, 28 Mar 2018 16:29:47 -0700 Martin Kelly <mkelly@xxxxxxxx> wrote: > On 03/05/2018 05:51 PM, Yong Deng wrote: > > This patchset add initial support for Allwinner V3s CSI. > > > > Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2 > > interface and CSI1 is used for parallel interface. This is not > > documented in datasheet but by test and guess. > > > > This patchset implement a v4l2 framework driver and add a binding > > documentation for it. > > > > Currently, the driver only support the parallel interface. And has been > > tested with a BT1120 signal which generating from FPGA. The following > > fetures are not support with this patchset: > > - ISP > > - MIPI-CSI2 > > - Master clock for camera sensor > > - Power regulator for the front end IC > > > > Hi Yong, > > Thanks so much, this driver is a great contribution! > > Unfortunately the board I'm working with (nanopi neo air) uses the MIPI > CSI-2 CSI0 interface rather than CSI1. Do you have any plans to support > the MIPI CSI-2 interface at some point? If not, do you know the scope of > what would be involved? AFAIK, there is no document about MIPI CSI-2. You can take a look at the source code in BSP: https://github.com/friendlyarm/h3_lichee/tree/master/linux-3.4/drivers/media/video/sunxi-vfe/mipi_csi And try to port it to mainline. Thanks, Yong -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
