Re: [PATCH V4 5/6] dts: arm64: Enable onboard SDHCI on msm8992

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri 27 Jan 01:10 PST 2017, Jeremy McNicoll wrote:

> This enables SDHCI on the Nexus 5X as well creates common smd_rpm node
> which can be shared between both 5X and 6P as per HW design.
> 
> Given the lack of documentation, only downstream code was used as a reference
> and it eludes to the fact that 8994-rpm-regulator is common between both msm8992
> & msm8994.   [ see msm.git branch: msm-angler-3.10-marshmallow-mr1, msm8992.dtsi]
> 
> At this early stage of development it makes sense for the 8994-rpm-regulator
> to be common until data / documentation suggests otherwise.
> 

Saw this as I looked through patchworks, still applies and compiles
cleanly.

Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> Signed-off-by: Jeremy McNicoll <jeremymc@xxxxxxxxxx>
> ---
>  .../boot/dts/qcom/msm8992-bullhead-rev-101.dts     |   2 +
>  arch/arm64/boot/dts/qcom/msm8992-pins.dtsi         |  60 +++++
>  arch/arm64/boot/dts/qcom/msm8992.dtsi              |  87 ++++++-
>  arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi      | 276 +++++++++++++++++++++
>  4 files changed, 424 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> index 4542133..3fc9a33 100644
> --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> @@ -39,3 +39,5 @@
>  		};
>  	};
>  };
> +
> +#include "msm8994-smd-rpm.dtsi"
> diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
> index d2a26f0..31bc9d9 100644
> --- a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
> @@ -35,4 +35,64 @@
>  			bias-pull-down;
>  		};
>  	};
> +
> +	/* 0-3 for sdc1 4-6 for sdc2 */
> +	/* Order of pins */
> +	/* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */
> +	/* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */
> +	sdc1_clk_on: clk-on {
> +		pinconf {
> +			pins = "sdc1_clk";
> +			bias-disable = <0>; /* No pull */
> +			drive-strength = <16>; /* 16mA */
> +		};
> +	};
> +
> +	sdc1_clk_off: clk-off {
> +		pinconf {
> +			pins = "sdc1_clk";
> +			bias-disable = <0>; /* No pull */
> +			drive-strength = <2>; /* 2mA */
> +		};
> +	};
> +
> +	sdc1_cmd_on: cmd-on {
> +		pinconf {
> +			pins = "sdc1_cmd";
> +			bias-pull-up;
> +			drive-strength = <8>;
> +		};
> +	};
> +
> +	sdc1_cmd_off: cmd-off {
> +		pinconf {
> +			pins = "sdc1_cmd";
> +			bias-pull-up = <0x3>; /* same as 3.10 ?? */
> +			drive-strength = <2>; /* 2mA */
> +		};
> +	};
> +
> +	sdc1_data_on: data-on {
> +		pinconf {
> +			pins = "sdc1_data";
> +			bias-pull-up;
> +			drive-strength = <8>; /* 8mA */
> +		};
> +	};
> +
> +	sdc1_data_off: data-off {
> +		pinconf {
> +			pins = "sdc1_data";
> +			bias-pull-up;
> +			drive-strength = <2>;
> +		};
> +	};
> +
> +	sdc1_rclk_on: rclk-on {
> +		bias-pull-down; /* pull down */
> +	};
> +
> +	sdc1_rclk_off: rclk-off {
> +		bias-pull-down; /* pull down */
> +	};
>  };
> diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
> index 2c05ec7..623c850 100644
> --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
> @@ -189,6 +189,31 @@
>  			reg = <0xfc400000 0x2000>;
>  		};
>  
> +		sdhci1: mmc@f9824900 {
> +			compatible = "qcom,sdhci-msm-v4";
> +			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
> +			reg-names = "hc_mem", "core_mem";
> +
> +			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>,
> +					<GIC_SPI 138 IRQ_TYPE_NONE>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>,
> +				<&clock_gcc GCC_SDCC1_AHB_CLK>;
> +			clock-names = "core", "iface";
> +
> +			pinctrl-names = "default", "sleep";
> +			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
> +					&sdc1_rclk_on>;
> +			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
> +					&sdc1_rclk_off>;
> +
> +			regulator-always-on;
> +			bus-width = <8>;
> +			mmc-hs400-1_8v;
> +			status = "okay";
> +		};
> +
>  		rpm_msg_ram: memory@fc428000 {
>  			compatible = "qcom,rpm-msg-ram";
>  			reg = <0xfc428000 0x4000>;
> @@ -231,7 +256,67 @@
>  		};
>  	};
>  
> +	smd_rpm: smd {
> +		compatible = "qcom,smd";
> +		rpm {
> +			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> +			qcom,ipc = <&apcs 8 0>;
> +			qcom,smd-edge = <15>;
> +			qcom,local-pid = <0>;
> +			qcom,remote-pid = <6>;
> +
> +			rpm-requests {
> +				compatible = "qcom,rpm-msm8994";
> +				qcom,smd-channels = "rpm_requests";
> +
> +				pm8994-regulators {
> +					compatible = "qcom,rpm-pm8994-regulators";
> +
> +					pm8994_s1: s1 {};
> +					pm8994_s2: s2 {};
> +					pm8994_s3: s3 {};
> +					pm8994_s4: s4 {};
> +					pm8994_s5: s5 {};
> +					pm8994_s6: s6 {};
> +					pm8994_s7: s7 {};
> +
> +					pm8994_l1: l1 {};
> +					pm8994_l2: l2 {};
> +					pm8994_l3: l3 {};
> +					pm8994_l4: l4 {};
> +					pm8994_l6: l6 {};
> +					pm8994_l8: l8 {};
> +					pm8994_l9: l9 {};
> +					pm8994_l10: l10 {};
> +					pm8994_l11: l11 {};
> +					pm8994_l12: l12 {};
> +					pm8994_l13: l13 {};
> +					pm8994_l14: l14 {};
> +					pm8994_l15: l15 {};
> +					pm8994_l16: l16 {};
> +					pm8994_l17: l17 {};
> +					pm8994_l18: l18 {};
> +					pm8994_l19: l19 {};
> +					pm8994_l20: l20 {};
> +					pm8994_l21: l21 {};
> +					pm8994_l22: l22 {};
> +					pm8994_l23: l23 {};
> +					pm8994_l24: l24 {};
> +					pm8994_l25: l25 {};
> +					pm8994_l26: l26 {};
> +					pm8994_l27: l27 {};
> +					pm8994_l28: l28 {};
> +					pm8994_l29: l29 {};
> +					pm8994_l30: l30 {};
> +					pm8994_l31: l31 {};
> +					pm8994_l32: l32 {};
> +
> +					pm8994_lvs1: lvs1 {};
> +					pm8994_lvs2: lvs2 {};
> +				};
> +			};
> +		};
> +	};
>  };
>  
> -
>  #include "msm8992-pins.dtsi"
> diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
> new file mode 100644
> index 0000000..47ebd16
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
> @@ -0,0 +1,276 @@
> +/* Copyright (c) 2015, LGE Inc. All rights reserved.
> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +&smd_rpm {
> +	rpm {
> +		rpm_requests {
> +			pm8994-regulators {
> +
> +				vdd_l1-supply = <&pm8994_s1>;
> +				vdd_l2_26_28-supply = <&pm8994_s3>;
> +				vdd_l3_11-supply = <&pm8994_s3>;
> +				vdd_l4_27_31-supply = <&pm8994_s3>;
> +				vdd_l5_7-supply = <&pm8994_s3>;
> +				vdd_l6_12_32-supply = <&pm8994_s5>;
> +				vdd_l8_16_30-supply = <&vreg_vph_pwr>;
> +				vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
> +				vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
> +				vdd_l14_15-supply = <&pm8994_s5>;
> +				vdd_l17_29-supply = <&vreg_vph_pwr>;
> +				vdd_l20_21-supply = <&vreg_vph_pwr>;
> +				vdd_l25-supply = <&pm8994_s5>;
> +				vdd_lvs1_2 = <&pm8994_s4>;
> +
> +				s1 {
> +					regulator-min-microvolt = <800000>;
> +					regulator-max-microvolt = <800000>;
> +				};
> +
> +				s2 {
> +					/* TODO */
> +				};
> +
> +				s3 {
> +					regulator-min-microvolt = <1300000>;
> +					regulator-max-microvolt = <1300000>;
> +				};
> +
> +				s4 {
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +					regulator-allow-set-load;
> +					regulator-system-load = <325000>;
> +				};
> +
> +				s5 {
> +					regulator-min-microvolt = <2150000>;
> +					regulator-max-microvolt = <2150000>;
> +				};
> +
> +				s7 {
> +					regulator-min-microvolt = <1000000>;
> +					regulator-max-microvolt = <1000000>;
> +				};
> +
> +				l1 {
> +					regulator-min-microvolt = <1000000>;
> +					regulator-max-microvolt = <1000000>;
> +				};
> +
> +				l2 {
> +					regulator-min-microvolt = <1250000>;
> +					regulator-max-microvolt = <1250000>;
> +				};
> +
> +				l3 {
> +					regulator-min-microvolt = <1200000>;
> +					regulator-max-microvolt = <1200000>;
> +				};
> +
> +				l4 {
> +					regulator-min-microvolt = <1225000>;
> +					regulator-max-microvolt = <1225000>;
> +				};
> +
> +				l5 {
> +					/* TODO */
> +				};
> +
> +				l6 {
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +				};
> +
> +				l7 {
> +					/* TODO */
> +				};
> +
> +				l8 {
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +				};
> +
> +				l9 {
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +				};
> +
> +				l10 {
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +					qcom,init-voltage = <1800000>;
> +				};
> +
> +				l11 {
> +					regulator-min-microvolt = <1200000>;
> +					regulator-max-microvolt = <1200000>;
> +					qcom,init-voltage = <1200000>;
> +				};
> +
> +				l12 {
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +					qcom,init-voltage = <1800000>;
> +					proxy-supply = <&pm8994_l12>;
> +					qcom,proxy-consumer-enable;
> +					qcom,proxy-consumer-current = <10000>;
> +					status = "okay";
> +				};
> +
> +				l13 {
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <2950000>;
> +					qcom,init-voltage = <2950000>;
> +					status = "okay";
> +				};
> +
> +				l14 {
> +					regulator-min-microvolt = <1200000>;
> +					regulator-max-microvolt = <1200000>;
> +					qcom,init-voltage = <1200000>;
> +					proxy-supply = <&pm8994_l14>;
> +					qcom,proxy-consumer-enable;
> +					qcom,proxy-consumer-current = <10000>;
> +					status = "okay";
> +				};
> +
> +				l15 {
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +					qcom,init-voltage = <1800000>;
> +					status = "okay";
> +				};
> +
> +				l16 {
> +					regulator-min-microvolt = <2700000>;
> +					regulator-max-microvolt = <2700000>;
> +					qcom,init-voltage = <2700000>;
> +					status = "okay";
> +				};
> +
> +				l17 {
> +					regulator-min-microvolt = <2700000>;
> +					regulator-max-microvolt = <2700000>;
> +					qcom,init-voltage = <2700000>;
> +					status = "okay";
> +				};
> +
> +				l18 {
> +					regulator-min-microvolt = <3000000>;
> +					regulator-max-microvolt = <3000000>;
> +					regulator-always-on;
> +					qcom,init-voltage = <3000000>;
> +					qcom,init-ldo-mode = <1>;
> +				};
> +
> +				l19 {
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +					qcom,init-voltage = <1800000>;
> +					status = "okay";
> +				};
> +
> +				l20 {
> +					regulator-min-microvolt = <2950000>;
> +					regulator-max-microvolt = <2950000>;
> +					regulator-always-on;
> +					regulator-boot-on;
> +					regulator-allow-set-load;
> +					regulator-system-load = <570000>;
> +				};
> +
> +				l21 {
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +					regulator-always-on;
> +					qcom,init-voltage = <1800000>;
> +				};
> +
> +				l22 {
> +					regulator-min-microvolt = <3100000>;
> +					regulator-max-microvolt = <3100000>;
> +					qcom,init-voltage = <3100000>;
> +				};
> +
> +				l23 {
> +					regulator-min-microvolt = <2800000>;
> +					regulator-max-microvolt = <2800000>;
> +					qcom,init-voltage = <2800000>;
> +				};
> +
> +				l24 {
> +					regulator-min-microvolt = <3075000>;
> +					regulator-max-microvolt = <3150000>;
> +					qcom,init-voltage = <3075000>;
> +				};
> +
> +				l25 {
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +					qcom,init-voltage = <1800000>;
> +				};
> +
> +				l26 {
> +					/* TODO: value from downstream
> +					regulator-min-microvolt = <987500>;
> +					fails to apply */
> +				};
> +
> +				l27 {
> +					regulator-min-microvolt = <1050000>;
> +					regulator-max-microvolt = <1050000>;
> +					qcom,init-voltage = <1050000>;
> +				};
> +
> +				l28 {
> +					regulator-min-microvolt = <1000000>;
> +					regulator-max-microvolt = <1000000>;
> +					qcom,init-voltage = <1000000>;
> +					proxy-supply = <&pm8994_l28>;
> +					qcom,proxy-consumer-enable;
> +					qcom,proxy-consumer-current = <10000>;
> +				};
> +
> +				l29 {
> +					/* TODO: Unsupported voltage range.
> +					regulator-min-microvolt = <2800000>;
> +					regulator-max-microvolt = <2800000>;
> +					qcom,init-voltage = <2800000>;
> +					*/
> +				};
> +
> +				l30 {
> +					/* TODO: get this verified
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +					qcom,init-voltage = <1800000>;
> +					*/
> +				};
> +
> +				l31 {
> +					regulator-min-microvolt = <1262500>;
> +					regulator-max-microvolt = <1262500>;
> +					qcom,init-voltage = <1262500>;
> +				};
> +
> +				l32 {
> +					/* TODO: get this verified
> +					regulator-min-microvolt = <1800000>;
> +					regulator-max-microvolt = <1800000>;
> +					qcom,init-voltage = <1800000>;
> +					*/
> +				};
> +			};
> +		};
> +	};
> +};
> -- 
> 2.6.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux