TCPCI stands for typec port controller interface, its implementation
has full typec port control with power delivery support, it's a
standard i2c slave with GPIO input as irq interface, detail see spec
"Universal Serial Bus Type-C Port Controller Interface Specification
Revision 1.0, Version 1.1"
Signed-off-by: Li Jun <jun.li@xxxxxxx>
---
.../devicetree/bindings/usb/typec-tcpci.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
new file mode 100644
index 0000000..7a7a8e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
@@ -0,0 +1,33 @@
+TCPCI(Typec port cotroller interface) binding
+---------------------------------------------
+
+Required properties:
+- compatible: should be "usb-tcpci,chip-specific-string".
+- reg: the i2c slave address of typec port controller device.
+- interrupt-parent: the phandle to the interrupt controller which provides
+ the interrupt.
+- interrupts: interrupt specification for tcpci alert.
+
+Required sub-node:
+- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
+ of connector node are specified in
+ Documentation/devicetree/bindings/connector/usb-connector.txt
+
+Example:
+
+ptn5110@50 {
+ compatible = "usb-tcpci,ptn5110";
+ reg = <0x50>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ port-type = "dual";
+ try-power-role = "sink"
+ source-pdos = <0x380190c8>;
+ sink-pdos = <0x380190c8 0x3802d0c8>;
+ op-sink-microwatt-hours = <9000000>;
+ };
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
