2u cpsw hardware on K2G uses sgmii link to interface with Phy. So add support for this interface in the code so that drover can be re-used for 2u hardware. Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx> --- drivers/net/ethernet/ti/netcp.h | 2 ++ drivers/net/ethernet/ti/netcp_ethss.c | 18 ++++++++++++++---- 2 files changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/ti/netcp.h b/drivers/net/ethernet/ti/netcp.h index 8900a6f..416f732 100644 --- a/drivers/net/ethernet/ti/netcp.h +++ b/drivers/net/ethernet/ti/netcp.h @@ -33,6 +33,8 @@ #define SGMII_LINK_MAC_MAC_FORCED 2 #define SGMII_LINK_MAC_FIBER 3 #define SGMII_LINK_MAC_PHY_NO_MDIO 4 +#define RGMII_LINK_MAC_PHY 5 +#define RGMII_LINK_MAC_PHY_NO_MDIO 7 #define XGMII_LINK_MAC_PHY 10 #define XGMII_LINK_MAC_MAC_FORCED 11 diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c index 1dea891..ab9d369 100644 --- a/drivers/net/ethernet/ti/netcp_ethss.c +++ b/drivers/net/ethernet/ti/netcp_ethss.c @@ -166,6 +166,9 @@ #define GBE_RXHOOK_ORDER 0 #define GBE_DEFAULT_ALE_AGEOUT 30 #define SLAVE_LINK_IS_XGMII(s) ((s)->link_interface >= XGMII_LINK_MAC_PHY) +#define SLAVE_LINK_IS_RGMII(s) \ + (((s)->link_interface >= RGMII_LINK_MAC_PHY) && \ + ((s)->link_interface <= RGMII_LINK_MAC_PHY_NO_MDIO)) #define NETCP_LINK_STATE_INVALID -1 #define GBE_SET_REG_OFS(p, rb, rn) p->rb##_ofs.rn = \ @@ -2091,8 +2094,9 @@ static void netcp_ethss_link_state_action(struct gbe_priv *gbe_dev, ALE_PORT_STATE_FORWARD); if (ndev && slave->open && - slave->link_interface != SGMII_LINK_MAC_PHY && - slave->link_interface != XGMII_LINK_MAC_PHY) + ((slave->link_interface != SGMII_LINK_MAC_PHY) && + (slave->link_interface != RGMII_LINK_MAC_PHY) && + (slave->link_interface != XGMII_LINK_MAC_PHY))) netif_carrier_on(ndev); } else { writel(mac_control, GBE_REG_ADDR(slave, emac_regs, @@ -2101,8 +2105,9 @@ static void netcp_ethss_link_state_action(struct gbe_priv *gbe_dev, ALE_PORT_STATE, ALE_PORT_STATE_DISABLE); if (ndev && - slave->link_interface != SGMII_LINK_MAC_PHY && - slave->link_interface != XGMII_LINK_MAC_PHY) + ((slave->link_interface != SGMII_LINK_MAC_PHY) && + (slave->link_interface != RGMII_LINK_MAC_PHY) && + (slave->link_interface != XGMII_LINK_MAC_PHY))) netif_carrier_off(ndev); } @@ -2914,6 +2919,7 @@ static int init_slave(struct gbe_priv *gbe_dev, struct gbe_slave *slave, slave->open = false; if ((slave->link_interface == SGMII_LINK_MAC_PHY) || + (slave->link_interface == RGMII_LINK_MAC_PHY) || (slave->link_interface == XGMII_LINK_MAC_PHY)) slave->phy_node = of_parse_phandle(node, "phy-handle", 0); slave->port_num = gbe_get_slave_port(gbe_dev, slave->slave_num); @@ -3076,6 +3082,9 @@ static void init_secondary_ports(struct gbe_priv *gbe_dev, if (slave->link_interface == SGMII_LINK_MAC_PHY) { phy_mode = PHY_INTERFACE_MODE_SGMII; slave->phy_port_t = PORT_MII; + } else if (slave->link_interface == RGMII_LINK_MAC_PHY) { + phy_mode = PHY_INTERFACE_MODE_RGMII; + slave->phy_port_t = PORT_MII; } else { phy_mode = PHY_INTERFACE_MODE_NA; slave->phy_port_t = PORT_FIBRE; @@ -3083,6 +3092,7 @@ static void init_secondary_ports(struct gbe_priv *gbe_dev, for_each_sec_slave(slave, gbe_dev) { if ((slave->link_interface != SGMII_LINK_MAC_PHY) && + (slave->link_interface != RGMII_LINK_MAC_PHY) && (slave->link_interface != XGMII_LINK_MAC_PHY)) continue; slave->phy = -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html