On Fri 23 Mar 03:18 PDT 2018, Sricharan R wrote: > Add a 'chosen' node to select the serial console. > This is needed when bootloaders do not pass the > 'console=' bootargs. > Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Regards, Bjorn > Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 8 ++++++++ > arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- > 2 files changed, 9 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi > index e413b21e..ef8d8c8 100644 > --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi > +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi > @@ -20,6 +20,14 @@ > model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; > compatible = "qcom,ipq4019"; > > + aliases { > + serial0 = &blsp1_uart1; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > soc { > rng@22000 { > status = "ok"; > diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi > index 10d112a..ea9202a 100644 > --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi > +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi > @@ -256,7 +256,7 @@ > regulator; > }; > > - serial@78af000 { > + blsp1_uart1: serial@78af000 { > compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > reg = <0x78af000 0x200>; > interrupts = <0 107 0>; > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html