On Mon, Mar 26, 2018 at 05:24:26PM -0500, Rob Herring wrote:
> On Wed, Mar 21, 2018 at 06:04:34PM +0100, Mark Jonas wrote:
> > From: Zhu Yi <yi.zhu5@xxxxxxxxxxxx>
> >
> > Add the ROHM BU21029 resistive touch panel controller
> > support with i2c interface.
> >
> > Signed-off-by: Zhu Yi <yi.zhu5@xxxxxxxxxxxx>
> > Signed-off-by: Mark Jonas <mark.jonas@xxxxxxxxxxxx>
> > Reviewed-by: Heiko Schocher <hs@xxxxxxx>
> > ---
> > .../bindings/input/touchscreen/bu21029.txt | 30 ++
> > drivers/input/touchscreen/Kconfig | 12 +
> > drivers/input/touchscreen/Makefile | 1 +
> > drivers/input/touchscreen/bu21029_ts.c | 456 +++++++++++++++++++++
> > 4 files changed, 499 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/bu21029.txt
> > create mode 100644 drivers/input/touchscreen/bu21029_ts.c
> >
> > diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt
> > new file mode 100644
> > index 0000000..7b61602
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt
> > @@ -0,0 +1,30 @@
> > +* Rohm BU21029 Touch Screen Controller
> > +
> > +Required properties:
> > + - compatible : must be "rohm,bu21029"
> > + - reg : i2c device address of the chip
>
> What the valid value(s)?
>
> > + - interrupt-parent : the phandle for the gpio controller
> > + - interrupts : (gpio) interrupt to which the chip is connected
> > + - reset-gpios : gpio pin to reset the chip
>
> Active high or low?
>
> > + - rohm,x-plate-ohms : x-plate resistance in ohms
>
> IIRC, we have a standard touchscreen property for this?
I do not think so: it is specific for resistive touchscreens, whereas
"standard" touchscreen properties are technology-independent ones (size,
rotation, etc).
>
> > +
> > +Optional properties:
> > + - touchscreen-max-pressure: maximum pressure value
> > +
> > +Example:
> > +
> > + &i2c1 {
> > + /* ... */
> > +
> > + bu21029: bu21029@40 {
> > + compatible = "rohm,bu21029";
> > + reg = <0x40>;
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
> > + reset-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
> > + rohm,x-plate-ohms = <600>;
> > + touchscreen-max-pressure = <4095>;
> > + };
> > +
> > + /* ... */
> > + };
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
