On Fri, Mar 23, 2018 at 02:11:35PM -0700, Florian Fainelli wrote: > On 03/23/2018 01:11 PM, Alexandre Belloni wrote: > > DT bindings for the Ethernet switch found on Microsemi Ocelot platforms. > > > > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > > Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> > > --- > > .../devicetree/bindings/net/mscc-ocelot.txt | 62 ++++++++++++++++++++++ > > 1 file changed, 62 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/net/mscc-ocelot.txt > > > > diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt > > new file mode 100644 > > index 000000000000..ee092a85b5a0 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/net/mscc-ocelot.txt > > @@ -0,0 +1,62 @@ > > +Microsemi Ocelot network Switch > > +=============================== > > + > > +The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513, > > +VSC7514) > > + > > +Required properties: > > +- compatible: Should be "mscc,ocelot-switch" > > +- reg: Must contain an (offset, length) pair of the register set for each > > + entry in reg-names. > > +- reg-names: Must include the following entries: > > + - "sys" > > + - "rew" > > + - "qs" > > + - "hsio" > > + - "qsys" > > + - "ana" > > + - "portX" with X from 0 to the number of last port index available on that > > + switch > > +- interrupts: Should contain the switch interrupts for frame extraction and > > + frame injection > > +- interrupt-names: should contain the interrupt names: "xtr", "inj" > > You are not documenting the "ports" subnode(s).Please move the > individual ports definition under a ports subnode, mainly for two reasons: > > - it makes it easy at the .dtsi level to have all ports disabled by default > > - this makes you strictly conforming to the DSA binding for Ethernet > switches and this is good for consistency (both parsing code and just > representation). ports and port collide with the OF graph binding. It would be good if this moved to ethernet-port(s) or similar. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
