This adds bindings for the NI XGE 1G/10G network device.
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Moritz Fischer <mdf@xxxxxxxxxx>
---
Changes from v4:
- None
Changes from v3:
- Added Rob's Reviewed-by
Changes from v2:
- Addressed Rob's comments w.r.t to IRQ names and typo
Changes from v1:
- Corrected from nixge -> nixge.txt
---
Documentation/devicetree/bindings/net/nixge.txt | 32 +++++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/nixge.txt
diff --git a/Documentation/devicetree/bindings/net/nixge.txt b/Documentation/devicetree/bindings/net/nixge.txt
new file mode 100644
index 000000000000..e55af7f0881a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nixge.txt
@@ -0,0 +1,32 @@
+* NI XGE Ethernet controller
+
+Required properties:
+- compatible: Should be "ni,xge-enet-2.00"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain tx and rx interrupt
+- interrupt-names: Should be "rx" and "tx"
+- phy-mode: See ethernet.txt file in the same directory.
+- phy-handle: See ethernet.txt file in the same directory.
+- nvmem-cells: Phandle of nvmem cell containing the MAC address
+- nvmem-cell-names: Should be "address"
+
+Examples (10G generic PHY):
+ nixge0: ethernet@40000000 {
+ compatible = "ni,xge-enet-2.00";
+ reg = <0x40000000 0x6000>;
+
+ nvmem-cells = <ð1_addr>;
+ nvmem-cell-names = "address";
+
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
+ interrupt-parent = <&intc>;
+
+ phy-mode = "xgmii";
+ phy-handle = <ðernet_phy1>;
+
+ ethernet_phy1: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <4>;
+ };
+ };
--
2.16.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
