Quoting tali.perry1@xxxxxxxxx (2018-03-20 06:40:49)
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 71ec41e6364f..353e94f2c25a 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -21,6 +21,7 @@ endif
> obj-$(CONFIG_MACH_ASM9260) += clk-asm9260.o
> obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
> obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
> +obj-$(CONFIG_ARCH_NPCM7XX) += clk-npcm7xx.o
Please sort this by filename, not config name.
> obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
> obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
> obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
> diff --git a/drivers/clk/clk-npcm7xx.c b/drivers/clk/clk-npcm7xx.c
> new file mode 100644
> index 000000000000..0d373f8f114b
> --- /dev/null
> +++ b/drivers/clk/clk-npcm7xx.c
> @@ -0,0 +1,757 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Nuvoton NPCM7xx Clock Generator
[..]
> +
> +
> +static struct clk_hw_onecell_data *npcm7xx_clk_data;
> +static void __iomem *clk_base;
Please remove static singletons and allocate them during init.
> +static DEFINE_SPINLOCK(lock);
Please give 'lock' a better name so that lockdep reports are
meaningful.
> +
> +
> +static const struct of_device_id npcm7xx_clk_match_table[] = {
> + { .compatible = "nuvoton,npcm750-clk"},
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(of, npcm7xx_clk_match_table);
Is this used?
> +
> +
> +static void __init npcm7xx_clk_init(struct device_node *clk_np)
> +{
> +
> + struct resource res;
> + struct clk_hw *hw;
> + struct clk *clk;
> + int ret;
> + int i;
> +
> + pr_debug("NPCM750: clock init: ");
> +
> + clk_base = NULL;
> +
> + ret = of_address_to_resource(clk_np, 0, &res);
> + if (ret) {
> + pr_err("\t%s: failed to get resource, ret %d\n", clk_np->name,
> + ret);
> + return;
> + }
> +
> +
> + clk_base = ioremap(res.start, resource_size(&res));
> + if (IS_ERR(clk_base)) {
> + pr_err("\tnpcm7xx_clk_init: resource error\n");
> + goto npcm7xx_init_error;
> + }
> +
> +
> + npcm7xx_clk_data = kzalloc(sizeof(*npcm7xx_clk_data->hws) *
> + NPCM7XX_NUM_CLOCKS + sizeof(npcm7xx_clk_data), GFP_KERNEL);
> +
> + npcm7xx_clk_data->num = 0;
> +
> + if (!npcm7xx_clk_data->hws) {
> + pr_err("Can't alloc npcm7xx_clk_data\n");
We don't need allocation error messages, kmalloc already prints a bunch
of info.
> + goto npcm7xx_init_np_err;
> + }
> +
> + npcm7xx_clk_data->num = NPCM7XX_NUM_CLOCKS;
> +
> +
> + /*
> + * This way all clock fetched before the platform device probes,
What platform device?
> + * except those we assign here for early use, will be deferred.
> + */
> + pr_debug("\tclk init hws\n");
> + for (i = 0; i < NPCM7XX_NUM_CLOCKS; i++)
> + npcm7xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
> +
> + /* Read fixed clocks. These 3 clocks must be defined in DT */
> + clk = of_clk_get_by_name(clk_np, NPCM7XX_CLK_S_REFCLK);
> + if (!IS_ERR(clk)) {
> + pr_err("failed to find external REFCLK: %ld\n",
> + PTR_ERR(clk));
> + clk_put(clk);
> + }
> +
> + clk = of_clk_get_by_name(clk_np, NPCM7XX_CLK_S_SYSBYPCK);
> + if (!IS_ERR(clk)) {
> + pr_err("failed to find external SYSBYPCK: %ld\n",
> + PTR_ERR(clk));
> + clk_put(clk);
> + }
> +
> + clk = of_clk_get_by_name(clk_np, NPCM7XX_CLK_S_MCBYPCK);
> + if (!IS_ERR(clk)) {
> + pr_err("failed to find external MCBYPCK: %ld\n",
> + PTR_ERR(clk));
> + clk_put(clk);
> + }
> +
> + /* Register plls */
> + pr_debug("\tclk register pll\n");
> + for (i = 0; i < ARRAY_SIZE(npcm7xx_plls); i++) {
> + const struct npcm7xx_clk_pll_data *pll_data = &npcm7xx_plls[i];
> +
> + pr_debug("\tclk reg pll%d, reg=0x%x, name=%s, p=%s\n", i,
> + (unsigned int)pll_data->reg, pll_data->name,
> + pll_data->parent_name);
> +
> + hw = npcm7xx_clk_register_pll(clk_base + pll_data->reg,
> + pll_data->name, pll_data->parent_name, pll_data->flags);
> + if (IS_ERR(hw)) {
> + pr_err("npcm7xx_clk: Can't register pll\n");
> + goto npcm7xx_init_fail;
> + }
> +
> + if (pll_data->onecell_idx >= 0)
> + npcm7xx_clk_data->hws[pll_data->onecell_idx] = hw;
> + }
> +
> + /* Register fixed dividers */
> + pr_debug("\tclk register fixed divs\n");
> + clk = clk_register_fixed_factor(NULL, NPCM7XX_CLK_S_PLL1_DIV2,
> + NPCM7XX_CLK_S_PLL1, 0, 1, 2);
> + if (IS_ERR(clk)) {
> + pr_err("npcm7xx_clk: Can't register fixed div\n");
> + goto npcm7xx_init_fail;
> + }
> +
> +
> + clk = clk_register_fixed_factor(NULL, NPCM7XX_CLK_S_PLL2_DIV2,
> + NPCM7XX_CLK_S_PLL2, 0, 1, 2);
> +
> + if (IS_ERR(clk)) {
> + pr_err("npcm7xx_clk: Can't register div2\n");
> + goto npcm7xx_init_fail;
> + }
> +
> + /* Register muxes */
> + for (i = 0; i < ARRAY_SIZE(npcm7xx_muxes); i++) {
> + const struct npcm7xx_clk_mux_data *mux_data = &npcm7xx_muxes[i];
> +
> + pr_debug("\tadd mux%d reg=0x%x name=%s p=%s num_p=%d\n",
> + i, ((u32)clk_base + (u32)NPCM7XX_CLKSEL), mux_data->name,
> + mux_data->parent_names[0], mux_data->num_parents);
> +
> + hw = clk_hw_register_mux_table(NULL,
> + mux_data->name,
> + mux_data->parent_names, mux_data->num_parents,
> + mux_data->flags, clk_base + NPCM7XX_CLKSEL,
> + mux_data->shift, mux_data->mask, 0,
> + mux_data->table, &lock);
> +
> + if (IS_ERR(hw)) {
> + pr_err("npcm7xx_clk: Can't register mux\n");
> + goto npcm7xx_init_fail;
> + }
> +
> + if (mux_data->onecell_idx >= 0)
> + npcm7xx_clk_data->hws[mux_data->onecell_idx] = hw;
> + }
> +
> + /* Register clock dividers specified in npcm7xx_divs. */
> + pr_debug("\tclk register divs\n");
> + for (i = 0; i < ARRAY_SIZE(npcm7xx_divs); i++) {
> + const struct npcm7xx_clk_div_data *div_data = &npcm7xx_divs[i];
> +
> + pr_debug("\tadd div%d reg=0x%x name=%s, parent=%s\n",
> + i, (unsigned int)div_data->reg,
> + div_data->name, div_data->parent_name);
Please remove all these debug prints.
> +
> + hw = clk_hw_register_divider(NULL, div_data->name,
> + div_data->parent_name,
> + div_data->flags,
> + clk_base + div_data->reg,
> + div_data->shift, div_data->width,
> + div_data->clk_divider_flags, &lock);
> + if (IS_ERR(hw)) {
> + pr_err("npcm7xx_clk: Can't register div table\n");
> + goto npcm7xx_init_fail;
> + }
> +
> + if (div_data->onecell_idx >= 0)
> + npcm7xx_clk_data->hws[div_data->onecell_idx] = hw;
> + }
> +
> + ret = of_clk_add_hw_provider(clk_np, of_clk_hw_onecell_get,
> + npcm7xx_clk_data);
> + if (ret)
> + pr_err("failed to add DT provider: %d\n", ret);
> +
> + pr_info("npcm7xx clk: %d dividers, %d muxes and %d plls registered.\n",
> + ARRAY_SIZE(npcm7xx_divs), ARRAY_SIZE(npcm7xx_muxes),
> + ARRAY_SIZE(npcm7xx_plls));
Please remove this "I'm alive!" message.
> +
> + of_node_put(clk_np);
> +
> + return;
> +
> +npcm7xx_init_fail:
> + pr_debug("\tclk setup fail\n");
Please don't put tabs at the beginning of printks.
> + if (npcm7xx_clk_data->num)
> + kfree(npcm7xx_clk_data->hws);
> +npcm7xx_init_np_err:
> + if (clk_base != NULL)
> + iounmap(clk_base);
> +npcm7xx_init_error:
> + of_node_put(clk_np);
> +}
> +
> +CLK_OF_DECLARE(npcm7xx_clk_init, "nuvoton,npcm750-clk", npcm7xx_clk_init);
Any reason this can't be a platform driver?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
