From: Hans Verkuil <hans.verkuil@xxxxxxxxx> Some boards have both a DesignWare and their own CEC controller. The CEC pin is only hooked up to their own CEC controller and not to the DW controller. Add the cec-disable property to disable the DW CEC controller. This particular situation happens on Amlogic boards that have their own meson CEC controller. Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> Acked-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt index 33bf981fbe33..4a13f4858bc0 100644 --- a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt @@ -27,6 +27,9 @@ responsible for defining whether each property is required or optional. - "isfr" is the internal register configuration clock (mandatory). - "cec" is the HDMI CEC controller main clock (optional). +- cec-disable: Do not use the DWC CEC controller since the CEC line is not + hooked up even though the CEC DWC IP is present. + - ports: The connectivity of the DWC HDMI TX with the rest of the system is expressed in using ports as specified in the device graph bindings defined in Documentation/devicetree/bindings/graph.txt. The numbering of the ports -- 2.15.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
