From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> This series converts the only user of the handcoded, mach-specific reset routines in the davinci platform to using the reset framework. Patch 1 modifies the way lookup entries are registered with the reset framework. Patches 2-4 add necessary lookups/DT-properties. Patches 5-7 convert the davinci-rproc driver to the reset framework. Patch 8 removes now dead code. Philipp: it turned out that it's indeed better to use the reset controller's device name for the entry lookup. Tested both in DT and legacy modes by booting the examples from ti-ipc-rtos recipe in meta-ti. This series applies on top of David Lechner's common-clk-v9 branch[1] with Philipp Zabel's reset/next branch[2] pulled in. It can be found in my github tree as well[3]. [1] git://github.com/dlech/ev3dev-kernel.git common-clk-v9 [2] git://git.pengutronix.de/git/pza/linux reset/next [3] git@xxxxxxxxxx:brgl/linux.git topic/davinci-reset Bartosz Golaszewski (8): reset: modify the way reset lookup works for board files ARM: davinci: dts: make psc0 a reset provider ARM: davinci: dts: add a reset control to the dsp node clk: davinci: add a reset lookup table for psc0 remoteproc: da8xx: add the missing checke for clk_enable() remoteproc: da8xx: prepare and unprepare the clock where needed remoteproc: da8xx: use the reset framework clk: davinci: kill davinci_clk_reset_assert/deassert() arch/arm/boot/dts/da850.dtsi | 2 ++ arch/arm/mach-davinci/include/mach/clock.h | 21 ---------------- drivers/clk/davinci/psc-da850.c | 8 ++++++ drivers/clk/davinci/psc.c | 19 +------------- drivers/remoteproc/da8xx_remoteproc.c | 40 ++++++++++++++++++++++++------ drivers/reset/core.c | 33 +++++++++++++++++++++--- include/linux/reset-controller.h | 8 +++--- 7 files changed, 78 insertions(+), 53 deletions(-) delete mode 100644 arch/arm/mach-davinci/include/mach/clock.h -- 2.16.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
