On 17 March 2018 at 00:19, Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx> wrote: > On 10 March 2018 at 15:01, Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx> wrote: >> On 2 March 2018 at 08:31, Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx> wrote: >>> Add a binding and a driver for the I2C IP found in the Socionext SynQuacer >>> SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller. >>> >>> I think this is good to go now. Wolfram? >>> >> >> Ping? >> > > Ping? > Hello Wolfram, Do you intend to queue this for v4.17? Or are there any issues that need to be addressed first? Thanks, Ard. >>> v5: >>> - add Rob's ack to #1 >>> - drop unnecessary 'platform_set_drvdata(pdev, NULL)' in remove path (#2) >>> >>> v4: >>> - clarify binding that only a single interrupt specifier is expected (#1) >>> - check return value of clk_prepare_enable() on probe path (#2) >>> - add Andy's R-b to patch #2 >>> >>> v3: >>> - incorporate more of Andy's review comments (#2), especially regarding the >>> bus speed and clock source handling for ACPI >>> - patch #1 unchanged. >>> >>> v2: >>> - incorporate Andy's review comments (#2) >>> - patch #1 unchanged. >>> >>> Ard Biesheuvel (2): >>> dt-bindings: i2c: add binding for Socionext SynQuacer I2C >>> i2c: add support for Socionext SynQuacer I2C controller >>> >>> Documentation/devicetree/bindings/i2c/i2c-synquacer.txt | 29 + >>> drivers/i2c/busses/Kconfig | 10 + >>> drivers/i2c/busses/Makefile | 1 + >>> drivers/i2c/busses/i2c-synquacer.c | 791 ++++++++++++++++++++ >>> 4 files changed, 831 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt >>> create mode 100644 drivers/i2c/busses/i2c-synquacer.c >>> >>> -- >>> 2.11.0 >>> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
