Quoting David Lechner (2018-03-15 19:52:18) > This adds a new driver for mach-davinci PLL clocks. This is porting the > code from arch/arm/mach-davinci/clock.c to the common clock framework. > Additionally, it adds device tree support for these clocks. > > The ifeq ($(CONFIG_COMMON_CLK), y) in the Makefile is needed to prevent > compile errors until the clock code in arch/arm/mach-davinci is removed. > > Note: although there are similar clocks for TI Keystone we are not able > to share the code for a few reasons. The keystone clocks are device tree > only and use legacy one-node-per-clock bindings. Also the register > layouts are a bit different, which would add even more if/else mess > to the keystone clocks. And the keystone PLL driver doesn't support > setting clock rates. > > Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx> > --- Applied to clk-next -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
