On Mon, Mar 19, 2018 at 10:59 AM, David Lechner <david@xxxxxxxxxxxxxx> wrote: > On 03/19/2018 08:17 AM, Bartosz Golaszewski wrote: >> >> 2018-03-16 3:52 GMT+01:00 David Lechner <david@xxxxxxxxxxxxxx>: >>> >>> This series converts mach-davinci to use the common clock framework. >>> >>> The series works like this, the first 19 patches create new clock drivers >>> using the common clock framework. There are basically 3 groups of clocks >>> - >>> PLL, PSC and CFGCHIP (syscon). There are six different SoCs that each >>> have >>> unique init data, which is the reason for so many patches. >>> >>> Then, starting with "ARM: davinci: pass clock as parameter to >>> davinci_timer_init()", we get the mach code ready for the switch by >>> adding the >>> code needed for the new clock drivers and adding #ifndef >>> CONFIG_COMMON_CLK >>> around the legacy clocks so that we can switch easily between the old and >>> the >>> new. >>> >>> "ARM: davinci: switch to common clock framework" actually flips the >>> switch >>> to start using the new clock drivers. Then the next 8 patches remove all >>> of the old clock code. >>> >>> The final three patches add device tree clock support to the one SoC that >>> supports it. >>> >>> This series has been tested on LEGO MINDSTORMS EV3 (device tree) and TI >>> OMAP-L138 LCDK (both device tree and legacy board file). >>> >> >> Hi David, >> >> thanks, with the u-boot fix everything seems to work fine. I tested >> da850-lcdk and da850-evm boards in DT and board file modes. >> I tested MMC and Ethernet. Both appear to be operating normally, but I have having USB issues. Should I be testing cpufreq? I noticed that when changing the frequencies, the USB appears to stop recognizing connections and disconnections. I did some testing on the DA850-EVM with USB from your repo, and I'm getting some crashing on MUSB unplug that do not appear in the 4.16-RC6 from linux-stable: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13 at drivers/dma/cppi41.c:694 cppi41_stop_chan+0x1f4/0x378 [cppi41] Modules linked in: evbug evdev mousedev hid_generic usbhid hid usb_f_ss_lb g_zero libcomposite configfs ofpart cmdlinepart m25p80 spi_nor cppi41 adv7343 tvp514x vpif_display vpif_capture videobuf2_dma_con tig videobuf2_memops videobuf2_v4l2 videobuf2_common v4l2_fwnode v4l2_common snd_soc_simple_card tilcdc spi_davinci snd_soc_simple_card_utils videodev pwm_tiecap spi_bitbang da8xx drm_kms_helper phy_gener ic syscopyarea ohci_da8xx musb_hdrc sysfillrect sysimgblt fb_sys_fops ohci_hcd udc_core drm usbcore drm_panel_orientation_quirks usb_common snd_soc_tlv320aic3x vpif snd_soc_davinci_mcasp snd_soc_edma snd_ soc_core snd_pcm_dmaengine snd_pcm rtc_omap snd_timer snd soundcore phy_da8xx_usb davinci_nand nand nand_ecc mtd pwm_bl backlight cpufreq_dt ti_aemif CPU: 0 PID: 13 Comm: kworker/0:1 Not tainted 4.16.0-rc5-g291ba8b-dirty #3 Hardware name: Generic DA850/OMAP-L138/AM18x Workqueue: usb_hub_wq hub_event [usbcore] Backtrace: [<c000df94>] (dump_backtrace) from [<c000e264>] (show_stack+0x18/0x1c) r7:00000009 r6:00000000 r5:bf339ad0 r4:00000000 [<c000e24c>] (show_stack) from [<c04864c0>] (dump_stack+0x20/0x28) [<c04864a0>] (dump_stack) from [<c001ac38>] (__warn+0xd4/0xfc) [<c001ab64>] (__warn) from [<c001ad7c>] (warn_slowpath_null+0x44/0x50) r8:c6c43080 r7:c05f1008 r6:bf338744 r5:000002b6 r4:bf339ad0 [<c001ad38>] (warn_slowpath_null) from [<bf338744>] (cppi41_stop_chan+0x1f4/0x378 [cppi41]) r6:c5e59410 r5:c5e59420 r4:c5feca50 [<bf338550>] (cppi41_stop_chan [cppi41]) from [<bf213dac>] (cppi41_dma_channel_abort+0xe0/0x2a8 [musb_hdrc]) r8:c6929180 r7:00000000 r6:c5c67290 r5:bf2175a0 r4:00000008 [<bf213ccc>] (cppi41_dma_channel_abort [musb_hdrc]) from [<bf20c4bc>] (musb_cleanup_urb+0x60/0x210 [musb_hdrc]) r10:00000001 r9:c5fca010 r8:c5c67290 r7:a0000093 r6:00000080 r5:c55b5100 r4:c5fca5a8 [<bf20c45c>] (musb_cleanup_urb [musb_hdrc]) from [<bf20ca8c>] (musb_urb_dequeue+0xfc/0x164 [musb_hdrc]) r10:00000001 r9:40408280 r8:c5fca010 r7:a0000093 r6:00000000 r5:c55b5380 r4:c55b5100 [<bf20c990>] (musb_urb_dequeue [musb_hdrc]) from [<bf10fd7c>] (unlink1+0x34/0x13c [usbcore]) r10:00000100 r9:c5cb2a00 r8:c55b5100 r7:ffffff94 r6:c5c6c000 r5:c5dd2380 r4:c55b5100 r3:bf20c990 [<bf10fd48>] (unlink1 [usbcore]) from [<bf112424>] (usb_hcd_flush_endpoint+0x164/0x1a4 [usbcore]) r9:c5cb2a00 r8:c55b5100 r7:c5c6c000 r6:c5dd2398 r5:c5dd2380 r4:ffffe000 [<bf1122c0>] (usb_hcd_flush_endpoint [usbcore]) from [<bf11563c>] (usb_disable_endpoint+0x50/0x94 [usbcore]) r9:c5cb2a00 r8:bf39e898 r7:00000000 r6:c5c43000 r5:c5c43000 r4:c5dd2380 [<bf1155ec>] (usb_disable_endpoint [usbcore]) from [<bf1156c4>] (usb_disable_interface+0x44/0x58 [usbcore]) r5:c5dd2348 r4:00000000 [<bf115680>] (usb_disable_interface [usbcore]) from [<bf118044>] (usb_unbind_interface+0x1c0/0x268 [usbcore]) r7:c5cb2c00 r6:bf39e898 r5:c5cb2c20 r4:c5cb2c20 [<bf117e84>] (usb_unbind_interface [usbcore]) from [<c02ce180>] (device_release_driver_internal+0x160/0x208) r10:00000100 r9:c5cb2a00 r8:00000034 r7:00000000 r6:bf39e898 r5:c5cb2c54 r4:c5cb2c20 [<c02ce020>] (device_release_driver_internal) from [<c02ce240>] (device_release_driver+0x18/0x1c) r9:c5cb2a00 r8:c05f1008 r7:c5c43070 r6:bf12895c r5:c5cb2c20 r4:c5dc91ac [<c02ce228>] (device_release_driver) from [<c02ccf70>] (bus_remove_device+0xd0/0x100) [<c02ccea0>] (bus_remove_device) from [<c02c9c60>] (device_del+0x120/0x378) r7:c5c43070 r6:c5cb2c28 r5:00000000 r4:c5cb2c20 [<c02c9b40>] (device_del) from [<bf11576c>] (usb_disable_device+0x94/0x1d8 [usbcore]) r10:00000100 r9:c5cb2a00 r8:c5cb2c00 r7:c5c6c000 r6:00000001 r5:00000000 r4:c5c43000 [<bf1156d8>] (usb_disable_device [usbcore]) from [<bf10bccc>] (usb_disconnect+0xb4/0x244 [usbcore]) r9:c5cb2a00 r8:c5c2d600 r7:c5c430a4 r6:c5c43070 r5:c5c43000 r4:00000000 [<bf10bc18>] (usb_disconnect [usbcore]) from [<bf10d788>] (hub_event+0x678/0x11dc [usbcore]) r10:00000100 r9:c05f1008 r8:c5c2dcf8 r7:c68fc400 r6:00000001 r5:40000000 r4:00000000 [<bf10d110>] (hub_event [usbcore]) from [<c0031db0>] (process_one_work+0x1d8/0x41c) r10:00000008 r9:00000000 r8:c060b1d0 r7:00000000 r6:c7ede200 r5:c6882480 r4:c5c2dcf8 [<c0031bd8>] (process_one_work) from [<c0032030>] (worker_thread+0x3c/0x670) r10:00000008 r9:c060b1e4 r8:c061ab60 r7:c6882498 r6:ffffe000 r5:c060b1d0 r4:c6882480 [<c0031ff4>] (worker_thread) from [<c0038270>] (kthread+0x134/0x14c) r10:c683fe90 r9:c0031ff4 r8:c6882480 r7:c6896000 r6:00000000 r5:c687bd80 r4:c6803e80 [<c003813c>] (kthread) from [<c00090e0>] (ret_from_fork+0x14/0x34) Exception stack(0xc6897fb0 to 0xc6897ff8) 7fa0: 00000000 00000000 00000000 00000000 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c003813c r4:c687bd80 ---[ end trace cb9c7f93aaa3ed36 ]--- ------------[ cut here ]------------ adam >> I'll be working with this series in the following days and will do >> some thorough testing and rebase my aemif series on top of it. I'll >> also use the recently merged reset support for board files to get rid >> of the exported reset functions. >> >> Thanks for your work! >> >> Best regards, >> Bartosz Golaszewski >> > > Sounds like a good plan to me. FYI, I've started a common-clk-v9 branch > on my GitHub already with a few minor fixes. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
