Re: [PATCH v1 12/19] arm: dts: mt7623: fix all Warnings (unit_address_vs_reg)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 02/23/2018 11:16 AM, sean.wang@xxxxxxxxxxxx wrote:
> From: Sean Wang <sean.wang@xxxxxxxxxxxx>
> 
> Fix below a lot of warnings that dtc complains so much
> 
> Warning (unit_address_vs_reg): Node /oscillator@1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /oscillator@0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/cir@0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/i2c@0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/i2c@1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/i2s@0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/i2s@1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/keys@0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/leds@0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/pwm@0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/spi@0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/uart@0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/uart@1 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /pinctrl@10005000/uart@2 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /ethernet@1b100000/mdio-bus/switch@0/ports has a reg or ranges property, but no unit name
> 
> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
>  arch/arm/boot/dts/mt7623.dtsi                 |  4 ++--
>  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 29 +++++++++++++--------------
>  arch/arm/boot/dts/mt7623n-rfb.dtsi            |  2 +-
>  3 files changed, 17 insertions(+), 18 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 4b68448..bf9db44 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -130,14 +130,14 @@
>  		#clock-cells = <0>;
>  	};
>  
> -	rtc32k: oscillator@1 {
> +	rtc32k: oscillator-1 {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
>  		clock-frequency = <32000>;
>  		clock-output-names = "rtc32k";
>  	};
>  
> -	clk26m: oscillator@0 {
> +	clk26m: oscillator-0 {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
>  		clock-frequency = <26000000>;
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index a6295ef..75e61c4 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -158,7 +158,6 @@
>  			ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> -				reg = <0>;
>  
>  				port@0 {
>  					reg = <0>;
> @@ -262,14 +261,14 @@
>  };
>  
>  &pio {
> -	cir_pins_a:cir@0 {
> +	cir_pins_a:cir-default {
>  		pins-cir {
>  			pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
>  			bias-disable;
>  		};
>  	};
>  
> -	i2c0_pins_a: i2c@0 {
> +	i2c0_pins_a: i2c0-default {
>  		pins-i2c0 {
>  			pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
>  				 <MT7623_PIN_76_SCL0_FUNC_SCL0>;
> @@ -277,7 +276,7 @@
>  		};
>  	};
>  
> -	i2c1_pins_a: i2c@1 {
> +	i2c1_pins_a: i2c1-default {
>  		pin-i2c1 {
>  			pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
>  				 <MT7623_PIN_58_SCL1_FUNC_SCL1>;
> @@ -285,7 +284,7 @@
>  		};
>  	};
>  
> -	i2s0_pins_a: i2s@0 {
> +	i2s0_pins_a: i2s0-default {
>  		pin-i2s0 {
>  			pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
>  				 <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
> @@ -297,7 +296,7 @@
>  		};
>  	};
>  
> -	i2s1_pins_a: i2s@1 {
> +	i2s1_pins_b: i2s1-default {

Why does this change from i2s1_pins_a to i2s1_pins_b?

>  		pin-i2s1 {
>  			pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
>  				 <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
> @@ -309,7 +308,7 @@
>  		};
>  	};
>  
> -	key_pins_a: keys@0 {
> +	key_pins_a: keys-alt {
>  		pins-keys {
>  			pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
>  				 <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
> @@ -317,7 +316,7 @@
>  		};
>  	};
>  
> -	led_pins_a: leds@0 {
> +	led_pins_a: leds-alt {
>  		pins-leds {
>  			pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
>  				 <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
> @@ -428,15 +427,15 @@
>  		};
>  	};
>  
> -	pcie_default: pcie_pin_default {
> -		pins_cmd_dat {
> +	pcie_default: pcie-pin-default {
> +		pins-cmd-dat {

No pcie node present in upstream. Please rebase.

Regards,
Matthias

>  			pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
>  				 <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
>  			bias-disable;
>  		};
>  	};
>  
> -	pwm_pins_a: pwm@0 {
> +	pwm_pins_a: pwm-default {
>  		pins-pwm {
>  			pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
>  				 <MT7623_PIN_204_PWM1_FUNC_PWM1>,
> @@ -446,7 +445,7 @@
>  		};
>  	};
>  
> -	spi0_pins_a: spi@0 {
> +	spi0_pins_a: spi0-default {
>  		pins-spi {
>  			pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
>  				<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
> @@ -456,21 +455,21 @@
>  		};
>  	};
>  
> -	uart0_pins_a: uart@0 {
> +	uart0_pins_a: uart0-default {
>  		pins-dat {
>  			pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
>  				 <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
>  		};
>  	};
>  
> -	uart1_pins_a: uart@1 {
> +	uart1_pins_a: uart1-default {
>  		pins-dat {
>  			pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
>  				 <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
>  		};
>  	};
>  
> -	uart2_pins_a: uart@2 {
> +	uart2_pins_a: uart2-default {
>  		pins-dat {
>  			pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
>  				 <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
> diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> index 256c5fd..128586d 100644
> --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
> +++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
> @@ -50,7 +50,7 @@
>  		reg = <0 0x80000000 0 0x40000000>;
>  	};
>  
> -	usb_p1_vbus: regulator@0 {
> +	usb_p1_vbus: regulator-5v {
>  		compatible = "regulator-fixed";
>  		regulator-name = "usb_vbus";
>  		regulator-min-microvolt = <5000000>;
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux