[PATCH v5 07/10] usb: dwc3: Make TX/RX threshold configurable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



DWC_usb31 periodic transfer at 48K+ bytes per interval may need
modification to the TX/RX packet threshold to achieve optimal result.
Add properties to make it configurable.

By default, periodic ESS TX and RX threshold are not enabled. To enable
TX or RX threshold (host mode only), both packet threshold count and max
burst size properties must be set to a valid non-zero value 1-16.

DWC_usb31 programming guide section 1.2.3 and 1.2.4.

Cc: John Youn <johnyoun@xxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/usb/dwc3.txt | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 44e8bab159ad..0dbd3083e7dd 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -57,6 +57,22 @@ Optional properties:
  - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ
 	register for post-silicon frame length adjustment when the
 	fladj_30mhz_sdbnd signal is invalid or incorrect.
+ - snps,rx-thr-num-pkt-prd: periodic ESS RX packet threshold count - host mode
+			only. Set this and rx-max-burst-prd to a valid,
+			non-zero value 1-16 (DWC_usb31 programming guide
+			section 1.2.4) to enable periodic ESS RX threshold.
+ - snps,rx-max-burst-prd: max periodic ESS RX burst size - host mode only. Set
+			this and rx-thr-num-pkt-prd to a valid, non-zero value
+			1-16 (DWC_usb31 programming guide section 1.2.4) to
+			enable periodic ESS RX threshold.
+ - snps,tx-thr-num-pkt-prd: periodic ESS TX packet threshold count - host mode
+			only. Set this and tx-max-burst-prd to a valid,
+			non-zero value 1-16 (DWC_usb31 programming guide
+			section 1.2.3) to enable periodic ESS TX threshold.
+ - snps,tx-max-burst-prd: max periodic ESS TX burst size - host mode only. Set
+			this and tx-thr-num-pkt-prd to a valid, non-zero value
+			1-16 (DWC_usb31 programming guide section 1.2.3) to
+			enable periodic ESS TX threshold.
 
  - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
 
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux