Re: [PATCH v2 2/3] arm64: dts: renesas: salvator-common: Configure PMIC for DDR Backup Power

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 14, 2018 at 06:17:17PM +0300, Sergei Shtylyov wrote:
> Hello!
> 
> On 03/14/2018 03:09 PM, Geert Uytterhoeven wrote:
> 
> > On Salvator-X(S), all of the DDR0, DDR1, DDR0C, and DDR1C power rails
> > need to be kept powered when backup mode is enabled.  Reflect this in
> > the "rohm,ddr-backup-power" property for the BD9571MWV PMIC node.
> > 
> > The accessory power switch (SW23) is a toggle switch, hense specify
> > "rohm,rstbmode-level".
> > 
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > ---
> > v2:
> >   - Add rohm,rstbmode-level.
> > ---
> >  arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
> > index 2a7f36abd2dd85c6..80794c38c2669d75 100644
> > --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
> > @@ -376,6 +376,8 @@
> >  		#interrupt-cells = <2>;
> >  		gpio-controller;
> >  		#gpio-cells = <2>;
> > +		rohm,ddr-backup-power = <15>;
> 
>   Why not 0xf if those are all bit flags?

Hi Geert,

could you address this feedback when you have some time?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux