On 2018-03-16 15:08, Sricharan R wrote:
Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103
++++++++++++++++++++++++++++++
1 file changed, 103 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 6a838b5..81dff867 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -21,6 +21,7 @@
aliases {
serial0 = &blsp1_uart5;
+ serial1 = &serial_blsp2;
};
chosen {
@@ -41,6 +42,47 @@
bias-disable;
};
};
+
+ i2c_0_pins: i2c_0_pinmux {
+ mux {
+ pins = "gpio42", "gpio43";
+ function = "blsp1_i2c";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pins {
+ mux {
+ pins = "gpio38", "gpio39", "gpio40", "gpio41";
+ function = "blsp0_spi";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ hsuart_pins: hsuart_pins {
+ mux {
+ pins = "gpio46", "gpio47", "gpio48", "gpio49";
+ function = "blsp2_uart";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ qpic_pins: qpic_pins {
+ mux {
+ pins = "gpio1", "gpio3", "gpio4",
+ "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio10", "gpio11",
+ "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17";
+ function = "qpic";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
};
serial@78b3000 {
@@ -48,5 +90,66 @@
pinctrl-names = "default";
status = "ok";
};
+
+ spi@78b5000 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a11", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+ };
+
+ serial@78B1000 {
s/78B1000/78b1000
With that,
Reviewed-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
+ pinctrl-0 = <&hsuart_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ i2c_0@78b6000 {
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ dma@7984000 {
+ status = "ok";
+ };
+
+ nand@79b0000 {
+ pinctrl-0 = <&qpic_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ };
+ };
+
+ phy@86000 {
+ status = "ok";
+ };
+
+ phy@8e000 {
+ status = "ok";
+ };
+
+ pci@20000000 {
+ status = "ok";
+ perst-gpio = <&tlmm 58 0x1>;
+ };
+
+ pci@10000000 {
+ status = "ok";
+ perst-gpio = <&tlmm 61 0x1>;
+ };
};
};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
