Re: [PATCH 2/2] drm/bridge: analogix: Enable EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 15, 2018 at 07:56:59PM -0700, Alexandru M Stan wrote:
> Configure the DPCD registers for the backlight to respect the pwm frequency
> of the input. We sometimes don't want it to generate its own.
> 
> Signed-off-by: Alexandru M Stan <amstan@xxxxxxxxxxxx>

I wonder a bit whether we should have some generic infrastructure in the
dp helpers itself to apply quirks like this. It's more-or-less what we
have for EDID quirking.

But then I guess for panels a lot of it is specific to the
bridge/encoder/panel combo and given platform, so probably not much use
for reuse across boards/platforms. External displays would be a different
story. I guess you can count that as an

Acked-by: Daniel Vetter <daniel.vetter@xxxxxxxx>

on the overall thing, but pls get bridge folks to review this too.
-Daniel

> ---
> 
>  drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 48 ++++++++++++++++++++++
>  drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |  1 +
>  2 files changed, 49 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 5c52307146c7..b830403be8eb 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -916,6 +916,46 @@ static irqreturn_t analogix_dp_irq_thread(int irq, void *arg)
>  	return IRQ_HANDLED;
>  }
>  
> +static int analogix_dp_backlight_pwm_passthru(struct analogix_dp_device *dp)
> +{
> +	u8 value;
> +	const u8 expected_cap = DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP |
> +				DP_EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU_CAP;
> +	int ret = 0;
> +
> +	ret = drm_dp_dpcd_readb(&dp->aux, DP_EDP_BACKLIGHT_ADJUSTMENT_CAP,
> +				&value);
> +	if (ret != 1) {
> +		DRM_DEV_ERROR(dp->dev,
> +			"backlight PWM passthru: Can't read BACKLIGHT_ADJUSTMENT_CAP\n");
> +		return ret;
> +	}
> +
> +	if ((value & expected_cap) != expected_cap) {
> +		DRM_DEV_ERROR(dp->dev,
> +			"panel doesn't support backlight PWM passthru, BACKLIGHT_ADJUSTMENT_CAP=0x%02x\n",
> +			value);
> +		return -1;
> +	}
> +
> +	ret = drm_dp_dpcd_readb(&dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> +				&value);
> +	if (ret != 1) {
> +		DRM_DEV_ERROR(dp->dev,
> +			"backlight PWM passthru: Can't read BACKLIGHT_MODE_SET_REGISTER\n");
> +		return ret;
> +	}
> +
> +	value |= DP_EDP_BACKLIGHT_FREQ_PWM_PIN_PASSTHRU_ENABLE;
> +	ret = drm_dp_dpcd_writeb(&dp->aux, DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> +				 value);
> +	if (ret != 1) {
> +		DRM_DEV_ERROR(dp->dev,
> +			"backlight PWM passthru: Can't write BACKLIGHT_MODE_SET_REGISTER\n");
> +	}
> +	return ret;
> +}
> +
>  static void analogix_dp_commit(struct analogix_dp_device *dp)
>  {
>  	int ret;
> @@ -954,6 +994,12 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
>  	dp->psr_enable = analogix_dp_detect_sink_psr(dp);
>  	if (dp->psr_enable)
>  		analogix_dp_enable_sink_psr(dp);
> +
> +	if (dp->backlight_pwm_passthru) {
> +		if (analogix_dp_backlight_pwm_passthru(dp) != 1)
> +			DRM_DEV_ERROR(dp->dev,
> +				 "Could not enable backlight pwm pin passthru.\n");
> +	}
>  }
>  
>  /*
> @@ -1424,6 +1470,8 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
>  	if (IS_ERR(dp->reg_base))
>  		return ERR_CAST(dp->reg_base);
>  
> +	dp->backlight_pwm_passthru =
> +	       of_property_read_bool(dev->of_node, "backlight-pwm-passthru");
>  	dp->force_hpd = of_property_read_bool(dev->of_node, "force-hpd");
>  
>  	dp->hpd_gpio = of_get_named_gpio(dev->of_node, "hpd-gpios", 0);
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> index 6a96ef7e6934..aea51413e78e 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> @@ -171,6 +171,7 @@ struct analogix_dp_device {
>  	struct phy		*phy;
>  	int			dpms_mode;
>  	int			hpd_gpio;
> +	bool			backlight_pwm_passthru;
>  	bool                    force_hpd;
>  	bool			psr_enable;
>  	bool			fast_train_support;
> -- 
> 2.13.5
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux