Hi Mark,
On 02/15/2014 05:50 AM, Mark Brown wrote:
On Fri, Feb 14, 2014 at 03:32:44PM +0900, Milo Kim wrote:
Bindings for TI LMU, backlight, LM3631 regulator and LM3633 LED are added.
Ah, sorry - I didn't notice that there were several different binding
documents in the patch.
@@ -0,0 +1,49 @@
+TI LMU LM3631 regulator device tree bindings
+
+Required properties:
+ - compatible: "ti,lm3631-regulator"
+
+Optional properties:
+ - regulator-name
+ - regulator-min-microvolt
+ - regulator-max-microvolt
+ - regulator-always-on
+ - regulator-boot-on
+
+ For those properties, please refer to:
+ Documentation/devicetree/bindings/regulator/regulator.txt
This doesn't correspond to the example which says that there is an
optional property "regulators" which can contain regualators lcd_boost,
lcd_vpos and lcd_vneg. It's also better to not enumerate all the
standard properties but just refer to the generic document (as you do).
That avoids confusion if new properties are added to the generic
regulator bindings.
The actual binding is fine, it's just the way it's documented.
Thank you. I've fixed things based on your comments.
Could you check the description below?
I'd like to get your feedback before sending patch-set v2.
From f0dcb9d8b21d38a6764c2e43cde4b41da3078c23 Mon Sep 17 00:00:00 2001
From: Milo Kim <milo.kim@xxxxxx>
Date: Mon, 17 Feb 2014 14:33:15 +0900
Subject: [PATCH 2/2] Documentation: fix LM3631 regulator DT based on
maintainer's feedback
Signed-off-by: Milo Kim <milo.kim@xxxxxx>
---
.../bindings/regulator/lm3631-regulator.txt | 63
++++++++++++++++++++
1 file changed, 63 insertions(+)
create mode 100644
Documentation/devicetree/bindings/regulator/lm3631-regulator.txt
diff --git
a/Documentation/devicetree/bindings/regulator/lm3631-regulator.txt
b/Documentation/devicetree/bindings/regulator/lm3631-regulator.txt
new file mode 100644
index 0000000..272cdc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/lm3631-regulator.txt
@@ -0,0 +1,63 @@
+TI LMU LM3631 regulator device tree bindings
+
+Required properties:
+ - compatible: "ti,lm3631-regulator"
+
+Sub-nodes:
+ - vboost
+ - vcont
+ - voref
+ - vpos
+ - vneg
+
+ Optional properties of each node:
+ Please refer to Documentation/devicetree/bindings/regulator/regulator.txt
+
+LM3631 regulator is represented as a sub-node of the "ti,lm3631" device.
+Please refer to "ti,lm3631" in
Documentation/devicetree/bindings/mfd/ti-lmu.txt
+
+Example:
+
+lm3631@29 {
+ compatible = "ti,lm3631";
+ reg = <0x29>;
+
+ ti,enable-gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ compatible = "ti,lm3631-regulator";
+
+ vboost {
+ regulator-name = "lcd_boost";
+ regulator-min-microvolt = <4500000>;
+ regulator-max-microvolt = <6350000>;
+ regulator-always-on;
+ };
+
+ vcont {
+ regulator-name = "lcd_vcont";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ voref {
+ regulator-name = "lcd_voref";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6000000>;
+ };
+
+ vpos {
+ regulator-name = "lcd_vpos";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-boot-on;
+ };
+
+ vneg {
+ regulator-name = "lcd_vneg";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-boot-on;
+ };
+ };
+};
--
1.7.9.5
Best regards,
Milo
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
