This series adds support for the TERES I open hardware laptop produced by olimex. With these patches and a bootloader capable of setting up simple framebuffer the laptop is quite useable. Patches 1-4 add some pin descriptions and devices in the A64 dtsi, which are useful to have on the teres. Patch 5 finally adds the board dts itself. Changes to the previous version are listed along the individual patches. best regards, Harald Harald Geyer (5): arm64: dts: allwinner: a64: Add i2c0 pins arm64: dts: allwinner: a64: Add watchdog arm64: dts: allwinner: a64: add simplefb for A64 SoC arm64: dts: allwinner: a64: Add pwm device arm64: allwinner: a64: Add support for TERES-I laptop .../devicetree/bindings/pwm/pwm-sun4i.txt | 1 + .../devicetree/bindings/watchdog/sunxi-wdt.txt | 6 +- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../boot/dts/allwinner/sun50i-a64-teres-i.dts | 279 +++++++++++++++++++++ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 46 ++++ 5 files changed, 331 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
