Document Thine THC63LVD1024 LVDS decoder device tree bindings. Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx> --- .../bindings/display/bridge/thine,thc63lvd1024.txt | 66 ++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt new file mode 100644 index 0000000..8225c6a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt @@ -0,0 +1,66 @@ +Thine Electronics THC63LVD1024 LVDS decoder +------------------------------------------- + +The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams +to parallel data outputs. The chip supports single/dual input/output modes, +handling up to two two input LVDS stream and up to two digital CMOS/TTL outputs. + +Single or dual operation modes, output data mapping and DDR output modes are +configured through input signals and the chip does not expose any control bus. + +Required properties: +- compatible: Shall be "thine,thc63lvd1024" + +Optional properties: +- vcc-supply: Power supply for TTL output and digital circuitry +- cvcc-supply: Power supply for TTL CLOCKOUT signal +- lvcc-supply: Power supply for LVDS inputs +- pvcc-supply: Power supply for PLL circuitry +- pdwn-gpios: Power down GPIO signal. Active low +- oe-gpios: Output enable GPIO signal. Active high + +The THC63LVD1024 video port connections are modeled according +to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt + +Required video port nodes: +- Port@0: First LVDS input port +- Port@2: First digital CMOS/TTL parallel output + +Optional video port nodes: +- Port@1: Second LVDS input port +- Port@3: Second digital CMOS/TTL parallel output + +Example: +-------- + + thc63lvd1024: lvds-decoder { + compatible = "thine,thc63lvd1024"; + + vcc-supply = <®_lvds_vcc>; + lvcc-supply = <®_lvds_lvcc>; + + pdwn-gpio = <&gpio4 15 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in_0: endpoint { + remote-endpoint = <&lvds_out>; + }; + }; + + port@2{ + reg = <2>; + + lvds_dec_out_2: endpoint { + remote-endpoint = <&adv7511_in>; + }; + + }; + + }; + }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html