The Allwinner A80 SoC has 2 documented TCONs. The display pipeline
diagram from the user manual shows a third TCON, but it's missing
an interrupt line, and its registers are not explained either.
It's also not used in Allwinner's vendor BSP.
The first TCON only has channel 0, for LCD panel output. The TCON
hardware setup is peculiar in that the eDP reset must also be
deasserted to allow access to the TCON. How the eDP module is wired
in the SoC itself is never explained.
The second TCON only has channel 1, and its output is connected to
the HDMI encoder block.
This patch adds a "needs_edp_reset" field to the tcon quirks structure,
and adds quirks and compatible strings for the 2 documented TCONs.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
drivers/gpu/drm/sun4i/sun4i_tcon.c | 27 +++++++++++++++++++++++++++
drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 +
2 files changed, 28 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index d4a29847dadd..b4cef03861f7 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -855,6 +855,7 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
struct sunxi_engine *engine;
struct device_node *remote;
struct sun4i_tcon *tcon;
+ struct reset_control *edp_rstc;
bool has_lvds_rst, has_lvds_alt, can_lvds;
int ret;
@@ -879,6 +880,20 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
return PTR_ERR(tcon->lcd_rst);
}
+ if (tcon->quirks->needs_edp_reset) {
+ edp_rstc = devm_reset_control_get_shared(dev, "edp");
+ if (IS_ERR(edp_rstc)) {
+ dev_err(dev, "Couldn't get edp reset line\n");
+ return PTR_ERR(edp_rstc);
+ }
+
+ ret = reset_control_deassert(edp_rstc);
+ if (ret) {
+ dev_err(dev, "Couldn't deassert edp reset line\n");
+ return ret;
+ }
+ }
+
/* Make sure our TCON is reset */
ret = reset_control_reset(tcon->lcd_rst);
if (ret) {
@@ -1176,6 +1191,16 @@ static const struct sun4i_tcon_quirks sun8i_v3s_quirks = {
.has_channel_0 = true,
};
+static const struct sun4i_tcon_quirks sun9i_a80_tcon_lcd_quirks = {
+ .has_channel_0 = true,
+ .needs_edp_reset = true,
+};
+
+static const struct sun4i_tcon_quirks sun9i_a80_tcon_tv_quirks = {
+ .has_channel_1 = true,
+ .needs_edp_reset = true,
+};
+
/* sun4i_drv uses this list to check if a device node is a TCON */
const struct of_device_id sun4i_tcon_of_table[] = {
{ .compatible = "allwinner,sun4i-a10-tcon", .data = &sun4i_a10_quirks },
@@ -1187,6 +1212,8 @@ const struct of_device_id sun4i_tcon_of_table[] = {
{ .compatible = "allwinner,sun8i-a83t-tcon-lcd", .data = &sun8i_a83t_lcd_quirks },
{ .compatible = "allwinner,sun8i-a83t-tcon-tv", .data = &sun8i_a83t_tv_quirks },
{ .compatible = "allwinner,sun8i-v3s-tcon", .data = &sun8i_v3s_quirks },
+ { .compatible = "allwinner,sun9i-a80-tcon-lcd", .data = &sun9i_a80_tcon_lcd_quirks },
+ { .compatible = "allwinner,sun9i-a80-tcon-tv", .data = &sun9i_a80_tcon_tv_quirks },
{ }
};
MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table);
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
index abdc6ad6b384..c4979559b591 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -176,6 +176,7 @@ struct sun4i_tcon_quirks {
bool has_channel_1; /* a33 does not have channel 1 */
bool has_lvds_alt; /* Does the LVDS clock have a parent other than the TCON clock? */
bool needs_de_be_mux; /* sun6i needs mux to select backend */
+ bool needs_edp_reset; /* a80 edp reset needed for tcon0 access */
bool supports_lvds; /* Does the TCON support an LVDS output? */
/* callback to handle tcon muxing options */
--
2.16.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
