Hi Philipp,
Okay, i too support the idea to add custom reset driver.
Many Thanks Philipp.
Best regards
Gabriel
On 03/14/2018 10:12 AM, Philipp Zabel wrote:
> Hi Gabriel,
>
> On Tue, 2018-03-13 at 17:34 +0100, gabriel.fernandez@xxxxxx wrote:
>> From: Gabriel Fernandez <gabriel.fernandez@xxxxxx>
>>
>> This patch-set enables the reset of STM32MP1.
>> It uses the reset simple driver by introducing the clear register offset
>> parameter.
>> STM32MP1 reset IP has a register to assert by writing '1' and another
>> register to de-assert by writing '1'.
>> The offset between this two registers is '0x4'.
> I worry a bit about feature creep in the simple-reset driver.
> Your patch on its own is simple enough, and I'm not opposed to add a
> SET/CLR feature on principle, but there are a few issues:
>
> The RESET_SIMPLE Kconfig description currently says:
> "This enables a simple reset controller driver for reset lines that
> that can be asserted and deasserted by toggling bits in a contiguous,
> exclusive register space."
> That would have to be extended to mention SET/CLR register pairs as an
> alternative.
>
> What about status (reset_simple_status)? Can current reset line status
> be read back from the SET register, as is currently tried? If not, is
> there a way to read current reset line status back at all?
>
> The data->lock spinlock is only needed to protect the read-modify-write
> cycle on a toggle register, for separate SET/CLR register access the
> locking is not necessary.
>
> At this point, it may or may not be easier to add a custom reset driver.
> Either way you go, this is missing binding documentation for the
> st,stm32mp1-rcc compatible in Documentation/devicetree/bindings/reset.
>
>> The patch 'dt-bindings: reset: add STM32MP1 resets' could be squashed
>> with the patch:
>> 'dt-bindings: Document STM32MP1 Reset Clock Controller (RCC) bindings'
>> commit 3830681d354f
>>
>> Gabriel Fernandez (2):
>> dt-bindings: reset: add STM32MP1 resets
>> reset: simple: Enable stm32mp1 reset driver
>>
>> drivers/reset/reset-simple.c | 27 +++++--
>> drivers/reset/reset-simple.h | 1 +
>> include/dt-bindings/reset/stm32mp1-resets.h | 108 ++++++++++++++++++++++++++++
>> 3 files changed, 130 insertions(+), 6 deletions(-)
>> create mode 100644 include/dt-bindings/reset/stm32mp1-resets.h
> regards
> Philipp
��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
