Re: [PATCHv2] arm: dts: zynq: Add support for Z-turn board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12.3.2018 21:05, tossel@xxxxxxxxx wrote:
> From: Anton Gerasimov <tossel@xxxxxxxxx>
> 
> Add a DTS for MYIR Z-turn board and the respective target in the
> Makefile.
> 
> Signed-off-by: Anton Gerasimov <tossel@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile       |   1 +
>  arch/arm/boot/dts/zynq-zturn.dts | 115 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 116 insertions(+)
>  create mode 100644 arch/arm/boot/dts/zynq-zturn.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index ade7a38543dc..4daa7d5d4db4 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1067,6 +1067,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
>  	zynq-zc702.dtb \
>  	zynq-zc706.dtb \
>  	zynq-zed.dtb \
> +	zynq-zturn.dtb \
>  	zynq-zybo.dtb
>  dtb-$(CONFIG_MACH_ARMADA_370) += \
>  	armada-370-db.dtb \
> diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts
> new file mode 100644
> index 000000000000..713d91fc3917
> --- /dev/null
> +++ b/arch/arm/boot/dts/zynq-zturn.dts
> @@ -0,0 +1,115 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + *  Copyright (C) 2015 Andrea Merello <adnrea.merello@xxxxxxxxx>
> + *
> + *  Based on zynq-zed.dts which is:
> + *  Copyright (C) 2011 - 2014 Xilinx
> + *  Copyright (C) 2012 National Instruments Corp.
> + *
> + */
> +
> +/dts-v1/;
> +/include/ "zynq-7000.dtsi"
> +
> +/ {
> +	model = "Zynq Z-Turn MYIR Board";
> +	compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
> +
> +	aliases {
> +		ethernet0 = &gem0;
> +		serial0 = &uart1;
> +		serial1 = &uart0;
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x40000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait";
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +		usr-led1 {
> +			label = "usr-led1";
> +			gpios = <&gpio0 0x0 0x1>;
> +			default-state = "off";
> +		};
> +
> +		usr-led2 {
> +			label = "usr-led2";
> +			gpios = <&gpio0 0x9 0x1>;
> +			default-state = "off";
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		autorepeat;
> +		K1 {
> +			label = "K1";
> +			gpios = <&gpio0 0x32 0x1>;
> +			linux,code = <0x66>;
> +			gpio-key,wakeup;
> +			autorepeat;
> +		};
> +	};
> +};
> +
> +&clkc {
> +	ps-clk-frequency = <33333333>;
> +};
> +
> +&gem0 {
> +	status = "okay";
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethernet_phy>;
> +
> +	ethernet_phy: ethernet-phy@0 {
> +		reg = <0x0>;
> +	};
> +};
> +
> +&sdhci0 {
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> +
> +&can0 {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	stlm75@49 {
> +		status = "okay";
> +		compatible = "lm75";
> +		reg = <0x49>;
> +	};
> +
> +	accelerometer@53 {
> +		compatible = "adi,adxl345", "adxl345";
> +		reg = <0x53>;
> +		interrupt-parent = <&intc>;
> +		interrupts = <0x0 0x1e 0x4>;
> +	};
> +};
> +
> 

Nit: Here is empty line at the end of file which I have removed.

I can't see any issue with this dts file.
Rob: I have added it to my zynq/dts branch. If you see any issue please
let us know.

https://github.com/Xilinx/linux-xlnx/tree/zynq/dt

Anton: Will be also good to update u-boot dts file with this one.

Thanks,
Michal
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux