trivial comments below
> This patch adds a LED class driver for the RGB LEDs found on
> the Crane Merchandising System CR0014114 LEDs board.
>
> Signed-off-by: Oleh Kravchenko <oleg@xxxxxxxxxx>
> ---
> .../devicetree/bindings/leds/leds-cr0014114.txt | 46 ++++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> drivers/leds/Kconfig | 13 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-cr0014114.c | 282 +++++++++++++++++++++
> 5 files changed, 343 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-cr0014114.txt
> create mode 100644 drivers/leds/leds-cr0014114.c
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-cr0014114.txt b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt
> new file mode 100644
> index 000000000000..56721598ee81
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt
> @@ -0,0 +1,46 @@
> +Crane Merchandising System - cr0014114 LED driver
> +-------------------------------------------------
> +
> +This LED Board widely used in vending machines produced
_is_ widely used
> +by Crane Merchandising Systems.
> +
> +Required properties:
> +- compatible: "cms,cr0014114"
> +- reg: chip select address for the device
> +- spi-cpha: shifted clock phase mode is required
> +
> +LED sub-node properties:
> +- label : (optional)
> + see Documentation/devicetree/bindings/leds/common.txt
> +- linux,default-trigger : (optional)
> + see Documentation/devicetree/bindings/leds/common.txt
> +
> +Example
> +-------
> +
> +cr0014114@0 {
> + compatible = "crane,cr0014114";
> + reg = <0>;
> + spi-max-frequency = <50000>;
> + spi-cpha;
> +
> + led0 {
> + label = "cr0:red:";
> + };
> + led1 {
> + label = "cr0:green:";
> + };
> + led2 {
> + label = "cr0:blue:";
> + };
> + led3 {
> + label = "cr1:red:";
> + };
> + led4 {
> + label = "cr1:green:";
> + };
> + led5 {
> + label = "cr1:blue:";
> + };
> + ...
> +};
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index ae850d6c0ad3..f17949c365f5 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -75,6 +75,7 @@ cnxt Conexant Systems, Inc.
> compulab CompuLab Ltd.
> cortina Cortina Systems, Inc.
> cosmic Cosmic Circuits
> +crane Crane Connectivity Solutions
> creative Creative Technology Ltd
> crystalfontz Crystalfontz America, Inc.
> cubietech Cubietech, Ltd.
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 2c896c0e69e1..bb6a70ac5004 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -104,6 +104,19 @@ config LEDS_CPCAP
> This option enables support for LEDs offered by Motorola's
> CPCAP PMIC.
>
> +config LEDS_CR0014114
> + tristate "LED Support for Crane CR0014114"
> + depends on LEDS_CLASS
> + depends on SPI
> + depends on OF
> + help
> + This option enables support for CR0014114 LED Board which
> + widely used in vending machines produced by
is widely
> + Crane Merchandising Systems.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called leds-cr0014114.
> +
> config LEDS_LM3530
> tristate "LCD Backlight driver for LM3530"
> depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 91eca81cae82..0176e7335994 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -78,6 +78,7 @@ obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
> obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o
>
> # LED SPI Drivers
> +obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
>
> # LED Userspace Drivers
> diff --git a/drivers/leds/leds-cr0014114.c b/drivers/leds/leds-cr0014114.c
> new file mode 100644
> index 000000000000..e3aecdbea73c
> --- /dev/null
> +++ b/drivers/leds/leds-cr0014114.c
> @@ -0,0 +1,282 @@
> +#include <linux/delay.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/property.h>
> +#include <linux/spi/spi.h>
> +#include <linux/spinlock.h>
> +#include <linux/timer.h>
> +#include <linux/workqueue.h>
> +
> +/* CR0014114 SPI commands */
> +#define CR_SET_BRIGHTNESS 0x80
> +#define CR_INIT_REENUMERATE 0x81
> +#define CR_NEXT_REENUMERATE 0x82
> +
> +/* CR0014114 default settings */
> +#define CR_MAX_BRIGHTNESS GENMASK(6, 0)
> +#define CR_FW_DELAY_MSEC 10
> +#define CR_RECOUNT_DELAY (HZ * 3600)
> +
> +struct cr0014114_led {
> + const char *name;
> + struct cr0014114 *priv;
> + struct led_classdev ldev;
> + u8 brightness;
> +};
> +
> +struct cr0014114 {
> + bool do_recount;
> + size_t count;
> + struct device *dev;
> + struct mutex lock;
> + struct spi_device *spi;
> + struct timer_list timer;
> + struct work_struct work;
> + unsigned long delay;
> + struct cr0014114_led leds[];
> +};
> +
> +static void cr0014114_calc_crc(u8 *buf, const size_t len)
> +{
> + size_t i;
> + u8 crc;
> +
> + for (i = 1, crc = 1; i < len - 1; i++)
> + crc += buf[i];
> + crc |= BIT(7);
> +
> + /* special case when CRC matches to SPI commands */
matches the
> + if (crc == CR_SET_BRIGHTNESS ||
> + crc == CR_INIT_REENUMERATE ||
> + crc == CR_NEXT_REENUMERATE)
> + crc = 0xfe;
> +
> + buf[len - 1] = crc;
> +}
> +
> +static int cr0014114_recount(struct cr0014114 *priv)
> +{
> + int ret;
> + size_t i;
> + u8 cmd;
> +
> + dev_dbg(priv->dev, "recount of LEDs is started\n");
> +
> + do {
> + cmd = CR_INIT_REENUMERATE;
> + ret = spi_write(priv->spi, &cmd, sizeof(cmd));
> + if (ret)
> + break;
> +
> + cmd = CR_NEXT_REENUMERATE;
> + for (i = 0; i < priv->count; i++) {
> + msleep(CR_FW_DELAY_MSEC);
> +
> + ret = spi_write(priv->spi, &cmd, sizeof(cmd));
> + if (ret)
> + break;
> + }
> + } while (0);
> +
> + dev_dbg(priv->dev, "recount of LEDs is complete, error: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static int cr0014114_sync(struct cr0014114 *priv)
> +{
> + int ret;
> + size_t i;
> + u8 data[priv->count + 2];
> + unsigned long udelay, now = jiffies;
> +
> + /* to avoid SPI mistiming with firmware we should wait some time */
> + if (time_after(priv->delay, now)) {
> + udelay = jiffies_to_usecs(priv->delay - now);
> + usleep_range(udelay, udelay + 1);
> + }
> +
> + do {
> + if (unlikely(priv->do_recount)) {
> + ret = cr0014114_recount(priv);
> + if (ret)
> + break;
> +
> + priv->do_recount = false;
> + }
> +
> + data[0] = CR_SET_BRIGHTNESS;
> + for (i = 0; i < priv->count; i++)
> + data[i + 1] = priv->leds[i].brightness;
> + cr0014114_calc_crc(data, sizeof(data));
> +
> + ret = spi_write(priv->spi, data, sizeof(data));
> + if (ret)
> + break;
> + } while (0);
> +
> + priv->delay = jiffies + msecs_to_jiffies(CR_FW_DELAY_MSEC);
> +
> + return ret;
> +}
> +
> +static void cr0014114_recount_work(struct work_struct *work)
> +{
> + int ret;
> + struct cr0014114 *priv = container_of(work, struct cr0014114,
> + work);
> +
> + mutex_lock(&priv->lock);
> + priv->do_recount = true;
> + ret = cr0014114_sync(priv);
> + mutex_unlock(&priv->lock);
> +
> + if (ret)
> + dev_warn(priv->dev, "recount LEDs failed %d\n", ret);
> +}
> +
> +int cr0014114_set_sync(struct led_classdev *ldev,
static?
> + enum led_brightness brightness)
> +{
> + int ret;
> + struct cr0014114_led *led = container_of(ldev,
> + struct cr0014114_led,
> + ldev);
> +
> + mutex_lock(&led->priv->lock);
> + led->brightness = (u8)brightness;
> + ret = cr0014114_sync(led->priv);
> + mutex_unlock(&led->priv->lock);
> +
> + return ret;
> +}
> +
> +void cr0014114_recount_timer(struct timer_list *t)
static?
> +{
> + struct cr0014114 *priv = from_timer(priv, t, timer);
> +
> + schedule_work(&priv->work);
> + mod_timer(&priv->timer, jiffies + CR_RECOUNT_DELAY);
> +}
> +
> +static int cr0014114_probe_dt(struct cr0014114 *priv)
> +{
> + size_t i = 0;
> + struct cr0014114_led *led;
> + struct fwnode_handle *child;
> + struct device_node *np;
> + int ret;
> +
> + device_for_each_child_node(priv->dev, child) {
> + np = to_of_node(child);
> + led = &priv->leds[i];
> +
> + ret = fwnode_property_read_string(child, "label",
> + &led->name);
> + if (ret && IS_ENABLED(CONFIG_OF) && np)
> + led->name = np->name;
> +
> + if (!led->name) {
> + fwnode_handle_put(child);
> + return -EINVAL;
> + }
> +
> + fwnode_property_read_string(child, "linux,default-trigger",
> + &led->ldev.default_trigger);
> +
> + led->priv = priv;
> + led->ldev.name = led->name;
> + led->ldev.brightness = LED_OFF;
> + led->ldev.max_brightness = CR_MAX_BRIGHTNESS;
> + led->ldev.brightness_set_blocking = cr0014114_set_sync;
> +
> + ret = devm_of_led_classdev_register(priv->dev, np,
> + &led->ldev);
> + if (ret) {
> + fwnode_handle_put(child);
> + return ret;
> + }
> +
> + led->ldev.dev->of_node = np;
> +
> + i++;
> + }
> +
> + return 0;
> +}
> +
> +static int cr0014114_probe(struct spi_device *spi)
> +{
> + struct cr0014114 *priv;
> + size_t count;
> + int ret;
> +
> + count = device_get_child_node_count(&spi->dev);
> + if (!count) {
> + dev_err(&spi->dev, "LEDs are not defined in device tree");
> + return -ENODEV;
> + }
> +
> + priv = devm_kzalloc(&spi->dev,
> + sizeof(*priv) + sizeof(*priv->leds) * count,
> + GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + mutex_init(&priv->lock);
> + INIT_WORK(&priv->work, cr0014114_recount_work);
> + priv->do_recount = true;
> + priv->count = count;
> + priv->dev = &spi->dev;
> + priv->spi = spi;
> +
> + ret = cr0014114_probe_dt(priv);
> + if (ret)
> + return ret;
> +
> + ret = cr0014114_sync(priv);
> + if (ret)
> + return ret;
> +
> + /* setup recount timer to workaround buggy firmware */
> + timer_setup(&priv->timer, cr0014114_recount_timer, 0);
> + mod_timer(&priv->timer, jiffies + CR_RECOUNT_DELAY);
> +
> + spi_set_drvdata(spi, priv);
> +
> + return 0;
> +}
> +
> +static int cr0014114_remove(struct spi_device *spi)
> +{
> + struct cr0014114 *priv = spi_get_drvdata(spi);
> +
> + cancel_work_sync(&priv->work);
> + del_timer_sync(&priv->timer);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id cr0014114_dt_ids[] = {
> + { .compatible = "crane,cr0014114", },
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(of, cr0014114_dt_ids);
> +
> +static struct spi_driver cr0014114_driver = {
> + .probe = cr0014114_probe,
> + .remove = cr0014114_remove,
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .of_match_table = cr0014114_dt_ids,
> + },
> +};
> +
> +module_spi_driver(cr0014114_driver);
> +
> +MODULE_AUTHOR("Oleh Kravchenko <oleg@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("cr0014114 LED driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("spi:cr0014114");
>
--
Peter Meerwald-Stadler
Mobile: +43 664 24 44 418
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
