The ACLK_VIO is a parent clock used by a several children,
its suggested clock rate is 400MHz. Right now it gets 400MHz
because it sources from CPLL(800M) and divides by 2 after reset.
It's good not to rely on default values like this, so let's
explicitly set it.
NOTE: it's expected that at least one board may override cru node and
set the CPLL to 1.6 GHz. On that board it will be very important to be
explicit about aclk-vio being 400 MHz.
Signed-off-by: Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 6 ++++--
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 ++++--
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 199a511..7d8d5de 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -580,7 +580,8 @@
<&cru PCLK_PERIHP>,
<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
- <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>;
+ <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+ <&cru ACLK_VIO>;
assigned-clock-rates =
<600000000>, <800000000>,
<1000000000>,
@@ -588,7 +589,8 @@
<37500000>,
<100000000>, <100000000>,
<50000000>, <800000000>,
- <100000000>, <50000000>;
+ <100000000>, <50000000>,
+ <400000000>;
};
&emmc_phy {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index d79e9b3..91ee951 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1259,7 +1259,8 @@
<&cru PCLK_PERIHP>,
<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
- <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>;
+ <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+ <&cru ACLK_VIO>;
assigned-clock-rates =
<594000000>, <800000000>,
<1000000000>,
@@ -1267,7 +1268,8 @@
<37500000>,
<100000000>, <100000000>,
<50000000>, <600000000>,
- <100000000>, <50000000>;
+ <100000000>, <50000000>,
+ <400000000>;
};
grf: syscon@ff770000 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
