The patch regulator: 88pg86x: add DT bindings document has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 2a254de29e995ea58d73f75b69016cf913a5447d Mon Sep 17 00:00:00 2001 From: Alexander Monakov <amonakov@xxxxxxxxx> Date: Fri, 9 Mar 2018 01:53:02 +0300 Subject: [PATCH] regulator: 88pg86x: add DT bindings document The only device-specific node names are "buck1" and "buck2" for the two regulators present on the device. Sleep mode GPIO and per-regulator GPIO enable pins are not exposed (the driver does not support them either). Signed-off-by: Alexander Monakov <amonakov@xxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- .../devicetree/bindings/regulator/88pg86x.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/88pg86x.txt diff --git a/Documentation/devicetree/bindings/regulator/88pg86x.txt b/Documentation/devicetree/bindings/regulator/88pg86x.txt new file mode 100644 index 000000000000..13b7f49a2ea8 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pg86x.txt @@ -0,0 +1,22 @@ +Marvell 88PG867/88PG868 voltage regulators + +Required properties: +- compatible: one of "marvell,88pg867", "marvell,88pg868"; +- reg: I2C slave address. + +Optional subnodes for regulators: "buck1", "buck2", using common regulator +bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>. + +Example: + + pg868@19 { + compatible = "marvell,88pg868"; + reg = <0x19>; + + vcpu: buck1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1350000>; + }; + }; -- 2.16.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
