[PATCH v4 3/3] pinctrl: bcm2835: Add support for output-low output-high properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Properties to set initial value of pin output buffer.
This can be useful for configure hardware in overlay files, and in early boot
for checking it states in QA sanity tests.

Signed-off-by: Matheus Castello <matheus@xxxxxxxxxxxxxxx>
---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 010c565..28acd06 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -965,6 +965,11 @@ static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
 			bcm2835_pull_config_set(pc, pin, BCM2835_PUD_UP);
 			break;
 
+		/* Set output-high or output-low */
+		case PIN_CONFIG_OUTPUT:
+			bcm2835_gpio_set_bit(pc, arg ? GPSET0 : GPCLR0, pin);
+			break;
+
 		default:
 			return -EINVAL;
 
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux