On Thu, Mar 8, 2018 at 10:02 AM, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> Hi,
>
> * Rob Herring <robh@xxxxxxxxxx> [180308 02:49]:
>> On Wed, Mar 07, 2018 at 10:21:43AM -0800, Tony Lindgren wrote:
>> > +TI RSTCTRL Reset Controller
>> > +
>> > +Required properties:
>> > +- compatible : "ti,rstctrl"
>> > +- reg : Should contain 1 register ranges(address and length)
>> > +- #reset-cells: 1
>> > +
>> > +Example:
>> > + prm_gfx: prm@1100 {
>> > + compatible = "simple-bus";
>>
>> What's a PRM?
>
> PRM is power and reset manager. There is one instance per
> interconnect instance (clockdomain). PRM shows the status of
> the connected devices in the interconnect, such as device
> context lost and hardware wake-up dependencies. It also
> contains a single reset controller register for external
> accelerators such as DSP. The reset controller instance then
> has 1 - 3 bits for external accelerator sub device resets.
> Then there is a reset status register that shows the reset
> reason for the external accelerator.
>
>> > + #address-cells = <1>;
>> > + #size-cells = <1>;
>> > + ranges = <0 0x1100 0x100>;
>>
>> And what else is in this range?
>
> In PRM, there are also registers for each interconnect device
> context lost and wake-up dependencies. We don't have a driver
> for that yet, it's handled by the SoC init code currently.
Regardless of having/needing a driver, you should take a stab at doing
the binding at least. It doesn't make sense to do the binding of the
child without doing the parent.
> Unlike the binding for reset controller, the binding for
> wake-up dependencies and context lost should look similar
> binding to the clkctrl clock binding we have. That's because
> there are tons of those registers.
>
>> > +
>> > + gfx_rstctrl: rstctrl@4 {
>> > + compatible = "ti,rstctrl";
>> > + reg = <0x4 0x4>;
>>
>> Anytime I see a single register in DT I worry about scaling. How many of
>> these in an SoC?
>
> There are not many instances of the reset controller. There
> is one register per interconnect instance for external
> accelerators, so about 3 - 10 reset controller registers
> per SoC.
Okay, seems a reasonable number.
However, couldn't you just have PRM node(s) and have that register as
a simple reset driver (along with anything else it handles).
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
