Thanks Tomasz, On 15 February 2014 00:27, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote: > Hi Rahul, > > The patch looks good, except one issue pointed inline. > > > On 14.02.2014 14:37, Rahul Sharma wrote: >> >> diff --git a/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts >> b/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts >> new file mode 100644 >> index 0000000..c4efc1e >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos5260-xyref5260-evt0.dts > > > [snip] > > >> +&mmc_0 { >> + status = "okay"; >> + num-slots = <1>; >> + broken-cd; >> + bypass-smu; >> + supports-highspeed; >> + supports-hs200-mode; /* 200 Mhz */ >> + fifo-depth = <0x40>; > > > This is a SoC-level property and it is already specified in your > exynos5260.dtsi. > Tomasz, yea correct. I will put these inside SoC node. Regards, Rahul Sharma. > >> + card-detect-delay = <200>; >> + samsung,dw-mshc-ciu-div = <3>; >> + samsung,dw-mshc-sdr-timing = <0 4>; >> + samsung,dw-mshc-ddr-timing = <0 2>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 >> &sd0_bus8>; >> + >> + slot@0 { >> + reg = <0>; >> + bus-width = <8>; >> + }; >> +}; >> + >> +&mmc_2 { >> + status = "okay"; >> + num-slots = <1>; >> + supports-highspeed; >> + fifo-depth = <0x40>; > > > Ditto. > > Best regards, > Tomasz -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html