From: Gabriel Fernandez <gabriel.fernandez@xxxxxx>
Two micro-controller clock output (MCO) pins are available:
MCO1 and MCO2.
For each output, it is possible to select a clock source.
The selected clock can be divided thanks to configurable
prescaler.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@xxxxxx>
---
drivers/clk/clk-stm32mp1.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c
index 51e3e76..b3a6ec4 100644
--- a/drivers/clk/clk-stm32mp1.c
+++ b/drivers/clk/clk-stm32mp1.c
@@ -252,6 +252,14 @@
"off", "ck_lse", "ck_lsi", "ck_hse_rtc"
};
+static const char * const mco1_src[] = {
+ "ck_hsi", "ck_hse", "ck_csi", "ck_lsi", "ck_lse"
+};
+
+static const char * const mco2_src[] = {
+ "ck_mpu", "ck_axi", "ck_mcu", "pll4_p", "ck_hse", "ck_hsi"
+};
+
static const struct clk_div_table axi_div_table[] = {
{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
{ 4, 4 }, { 5, 4 }, { 6, 4 }, { 7, 4 },
@@ -1960,6 +1968,18 @@ enum {
_MUX(RCC_BDCR, 16, 2, 0),
_NO_DIV),
+ /* MCO clocks */
+ COMPOSITE(CK_MCO1, "ck_mco1", mco1_src, CLK_OPS_PARENT_ENABLE |
+ CLK_SET_RATE_NO_REPARENT,
+ _GATE(RCC_MCO1CFGR, 12, 0),
+ _MUX(RCC_MCO1CFGR, 0, 3, 0),
+ _DIV(RCC_MCO1CFGR, 4, 4, 0, NULL)),
+
+ COMPOSITE(CK_MCO2, "ck_mco2", mco2_src, CLK_OPS_PARENT_ENABLE |
+ CLK_SET_RATE_NO_REPARENT,
+ _GATE(RCC_MCO2CFGR, 12, 0),
+ _MUX(RCC_MCO2CFGR, 0, 3, 0),
+ _DIV(RCC_MCO2CFGR, 4, 4, 0, NULL)),
};
struct stm32_clock_match_data {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
