On 03/05/2018 03:48 PM, John Garry wrote:
> From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
>
> The patch does some code cleanup and fixes some small bugs:
> - Correct return status of phy_up_v3_hw()
> - Add static for function phy_get_max_linkrate_v3_hw()
> - Change exception return status when no reset method
> - Change magic value to ts->stat in slot_complete_vx_hw()
> - Remove unnecessary check for dev_is_sata()
> - Fix some issues of alignment and indents (Authored by
> Xiaofei Tan in another patch, but added here to be
> practical)
>
> Signed-off-by: Xiaofei Tan <tanxiaofei@xxxxxxxxxx>
> Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
> Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
> ---
> drivers/scsi/hisi_sas/hisi_sas_main.c | 14 +++++++-------
> drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 4 +++-
> drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 10 ++++++----
> drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 16 +++++++++-------
> 4 files changed, 25 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
> index dff9723..49c1fa6 100644
> --- a/drivers/scsi/hisi_sas/hisi_sas_main.c
> +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
> @@ -33,7 +33,7 @@ u8 hisi_sas_get_ata_protocol(struct host_to_dev_fis *fis, int direction)
> case ATA_CMD_FPDMA_RECV:
> case ATA_CMD_FPDMA_SEND:
> case ATA_CMD_NCQ_NON_DATA:
> - return HISI_SAS_SATA_PROTOCOL_FPDMA;
> + return HISI_SAS_SATA_PROTOCOL_FPDMA;
>
> case ATA_CMD_DOWNLOAD_MICRO:
> case ATA_CMD_ID_ATA:
> @@ -45,7 +45,7 @@ u8 hisi_sas_get_ata_protocol(struct host_to_dev_fis *fis, int direction)
> case ATA_CMD_WRITE_LOG_EXT:
> case ATA_CMD_PIO_WRITE:
> case ATA_CMD_PIO_WRITE_EXT:
> - return HISI_SAS_SATA_PROTOCOL_PIO;
> + return HISI_SAS_SATA_PROTOCOL_PIO;
>
> case ATA_CMD_DSM:
> case ATA_CMD_DOWNLOAD_MICRO_DMA:
> @@ -64,7 +64,7 @@ u8 hisi_sas_get_ata_protocol(struct host_to_dev_fis *fis, int direction)
> case ATA_CMD_WRITE_LOG_DMA_EXT:
> case ATA_CMD_WRITE_STREAM_DMA_EXT:
> case ATA_CMD_ZAC_MGMT_IN:
> - return HISI_SAS_SATA_PROTOCOL_DMA;
> + return HISI_SAS_SATA_PROTOCOL_DMA;
>
> case ATA_CMD_CHK_POWER:
> case ATA_CMD_DEV_RESET:
> @@ -77,21 +77,21 @@ u8 hisi_sas_get_ata_protocol(struct host_to_dev_fis *fis, int direction)
> case ATA_CMD_STANDBY:
> case ATA_CMD_STANDBYNOW1:
> case ATA_CMD_ZAC_MGMT_OUT:
> - return HISI_SAS_SATA_PROTOCOL_NONDATA;
> + return HISI_SAS_SATA_PROTOCOL_NONDATA;
> default:
> {
> if (fis->command == ATA_CMD_SET_MAX) {
> switch (fis->features) {
> case ATA_SET_MAX_PASSWD:
> case ATA_SET_MAX_LOCK:
> - return HISI_SAS_SATA_PROTOCOL_PIO;
> + return HISI_SAS_SATA_PROTOCOL_PIO;
>
> case ATA_SET_MAX_PASSWD_DMA:
> case ATA_SET_MAX_UNLOCK_DMA:
> - return HISI_SAS_SATA_PROTOCOL_DMA;
> + return HISI_SAS_SATA_PROTOCOL_DMA;
>
> default:
> - return HISI_SAS_SATA_PROTOCOL_NONDATA;
> + return HISI_SAS_SATA_PROTOCOL_NONDATA;
> }
> }
> if (direction == DMA_NONE)
> diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
> index 8dd0e6a6..520ba69 100644
> --- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
> +++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
> @@ -651,8 +651,10 @@ static int reset_hw_v1_hw(struct hisi_hba *hisi_hba)
> dev_err(dev, "De-reset failed\n");
> return -EIO;
> }
> - } else
> + } else {
> dev_warn(dev, "no reset method\n");
> + return -EIO;
> + }
>
return -EINVAL?
> return 0;
> }
> diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
> index bd1a48a..69c4dd1 100644
> --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
> +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
> @@ -1095,8 +1095,10 @@ static int reset_hw_v2_hw(struct hisi_hba *hisi_hba)
> dev_err(dev, "SAS de-reset fail.\n");
> return -EIO;
> }
> - } else
> - dev_warn(dev, "no reset method\n");
> + } else {
> + dev_err(dev, "no reset method\n");
> + return -EIO;
> + }
>
> return 0;
> }
return -EINVAL?
> @@ -2408,7 +2410,7 @@ static void slot_err_v2_hw(struct hisi_hba *hisi_hba,
> spin_lock_irqsave(&hisi_hba->lock, flags);
> hisi_sas_slot_task_free(hisi_hba, task, slot);
> spin_unlock_irqrestore(&hisi_hba->lock, flags);
> - return -1;
> + return ts->stat;
> }
>
> if (unlikely(!sas_dev)) {> @@ -2667,7 +2669,7 @@ static int prep_abort_v2_hw(struct hisi_hba
*hisi_hba,
> /* dw0 */
> hdr->dw0 = cpu_to_le32((5 << CMD_HDR_CMD_OFF) | /*abort*/
> (port->id << CMD_HDR_PORT_OFF) |
> - ((dev_is_sata(dev) ? 1:0) <<
> + (dev_is_sata(dev) <<
> CMD_HDR_ABORT_DEVICE_TYPE_OFF) |
> (abort_flag << CMD_HDR_ABORT_FLAG_OFF));
>
> diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> index 8da9de7..b9b5d9f 100644
> --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> @@ -670,8 +670,10 @@ static int reset_hw_v3_hw(struct hisi_hba *hisi_hba)
> dev_err(dev, "Reset failed\n");
> return -EIO;
> }
> - } else
> + } else {
> dev_err(dev, "no reset method!\n");
> + return -EIO;
> + }
>
> return 0;
> }
return -EINVAL?
> @@ -731,7 +733,7 @@ static void phy_hard_reset_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
> start_phy_v3_hw(hisi_hba, phy_no);
> }
>
> -enum sas_linkrate phy_get_max_linkrate_v3_hw(void)
> +static enum sas_linkrate phy_get_max_linkrate_v3_hw(void)
> {
> return SAS_LINK_RATE_12_0_GBPS;
> }
> @@ -1096,7 +1098,7 @@ static int prep_abort_v3_hw(struct hisi_hba *hisi_hba,
> /* dw0 */
> hdr->dw0 = cpu_to_le32((5 << CMD_HDR_CMD_OFF) | /*abort*/
> (port->id << CMD_HDR_PORT_OFF) |
> - ((dev_is_sata(dev) ? 1:0)
> + (dev_is_sata(dev)
> << CMD_HDR_ABORT_DEVICE_TYPE_OFF) |
> (abort_flag
> << CMD_HDR_ABORT_FLAG_OFF));
> @@ -1114,7 +1116,7 @@ static int prep_abort_v3_hw(struct hisi_hba *hisi_hba,
>
> static int phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
> {
> - int i, res = 0;
> + int i, res;
> u32 context, port_id, link_rate;
> struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
> struct asd_sas_phy *sas_phy = &phy->sas_phy;
> @@ -1186,7 +1188,7 @@ static int phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
> phy->port_id = port_id;
> phy->phy_attached = 1;
> hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
> -
> + res = IRQ_HANDLED;
> end:
> hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
> CHL_INT0_SL_PHY_ENABLE_MSK);
> @@ -1217,7 +1219,7 @@ static int phy_down_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
> hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, CHL_INT0_NOT_RDY_MSK);
> hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_NOT_RDY_MSK, 0);
>
> - return 0;
> + return IRQ_HANDLED;
> }
>
> static void phy_bcast_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
If we're returning IRQ_HANDLED, shouldn't the function have the return
type irqreturn_t ?
But as this isn't an interrupt handler, shouldn't we rather fixup the
caller to check for the correct return values?
> @@ -1573,7 +1575,7 @@ static irqreturn_t fatal_axi_int_v3_hw(int irq_no, void *p)
> spin_lock_irqsave(&hisi_hba->lock, flags);
> hisi_sas_slot_task_free(hisi_hba, task, slot);
> spin_unlock_irqrestore(&hisi_hba->lock, flags);
> - return -1;
> + return ts->stat;
> }
>
> if (unlikely(!sas_dev)) {
>
Cheers,
Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
hare@xxxxxxx +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
